Payment & Delivery
Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
There are 59 products.
Reference: 44312
Brand: Slide
Approved for indirect food contact (†) Water-based formulation No chlorinated solvents Use on molds 212°F/100°C and above Maximum operating temp: 600°F/315°C † Meets 21CFR 175.300 for release agents.
Reference: 43200
Brand: Slide
Spray system for dispensing Slide aerosol cylinder products includes: An easy to program control unit A proximity sensor with 6-ft cord 10-ft of spray hose 2 spray nozzles 5-ft of source tank hose A 10-ft power cord
Reference: 43432
Brand: Slide
Concentrated liquid purging compound Water-based additive (use with barrel temperature above 212’F/100ºC) Can be mixed with any carrier resin Aids with resin-to-resin and color-to-color purges Choose self-measuring bottle or pre-measured packets Works with a carrier resin to remove unwanted contamination from the barrel assembly
Reference: 42910P
Brand: Slide
Neutralizes Fingerprints Non-Silicone / Non-Wax Self-Cleaning In Start-Up Seals Out Condensation Does Not Leach Out Of Mold Crevices And Mark Parts No Ozone Depleting Chemicals Excellent Overnight Protection 10/Oz Net Weight Aerosol Can
Reference: 46910
Brand: Slide
Slide’s most popular mold cleaner formulation NSF category P1 Evaporates fast, leaves no residue Contains no chlorinated solvents NSF-certified as safe for use on food machinery and molds
Reference: 42112N
Brand: Slide
Solvent-free dry formulation Approved As An Indirect Food Additive Recognized By Underwriters Laboratories Maximum operating temp: 600°F/315°C Classified NSF category M1
Reference: 44612
Brand: Slide
Recognized by UL Food-grade for indirect food contact (†) Fast-drying on cold and hot molds No chlorinated solvents Maximum operating temp: 600°F/315°C (†) Meets 21CFR 175.300 for release agents.
Reference: 42202
Brand: Slide
Slide 42202 Air-O-Spra sprayer utilizes compressed air at low pressure to atomize a low mist of spray. Included are a 12oz plastic spray bottle, 10' of braided hose, and 1/4" pipe-thread fitting.
Reference: 43401
Brand: Slide
Heat Stable Non-Toxic Non-Corrosive Non-Flammable Almost Odorless Packaged 50 Packets Per Box
Reference: 40212M
Brand: Slide
5 year protection* Displaces moisture while sealing mold from outside condensation Non-silicone, non-wax formulation No chlorinated solvents Neutralizes fingerprint acids *Protects up to five years under normal indoor storage conditions
Reference: 46410
Brand: Slide
NSF category P1 Offers more cleaning strength than other “natural” mold cleaners Can be used to help break down resin deposits from the mold surface and clogged vents No chlorinated solvents
Reference: 54912
Brand: Slide
Paintable, non-silicone Food-grade for indirect food contact (†) Slide’s heaviest-duty mold release Solvent-free dry formulation Maximum operating temp: 450°F/232°C
