List of products by brand Slide
Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Showing 49-59 of 59 item(s)
Reference:
40112N
Brand:
Slide
Food-grade for indirect food contact (†)
Recommended for food-packaging molding
Recognized by UL
Solvent-free dry formulation
Allows for faster molding & more production
Maximum operating temp: 600°F/315°C
Effective mold release for investment wax casting
A pure silicone oil is also offered (part #401CONC). Call for details.
† Meets 21CFR 175.300 for...
Reference:
41412
Brand:
Slide
Paintable release, will not interfere with post-molding decorating of parts
Specifically developed as a release for polycarbonate resin
Recognized by UL
Solvent-free dry formulation
Maximum operating temp: 650°F/343°C
Reference:
42612H
Brand:
Slide
Non-silicone, paintable mold release
Food-grade active ingredient (†††)
Recognized by UL
Solvent-free dry formulation
Contains no lecithin
Safe to use on most thermoplastics
Use where parts must be painted, hot-stamped or metalized
Maximum operating temp: 600°F/315°C
††† 21CFR 172.878 and 178.3620 (a)
Reference:
44110A
Brand:
Slide
Paintable, non-silicone release contains boron nitride
Effective release for engineering grade resins, low melting point metals and glass
Recommended for use with Ultem and other engineering-grade resins
High temperature mold release agent
No chlorinated solvents
Maximum operating temp: 1800°F/982°C
Reference:
41112N
Brand:
Slide
Formulated for deep draw molds
Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
No chlorinated solvents
Use it on phenolic & urethane resins
Contains PTFE
Maximum operating temp: 500°F/260°C
Bulk versions of this product should be thoroughly stirred prior to use
Reference:
40614
Brand:
Slide
Non-silicone, synthetic wax-based product
For epoxy, polyester and phenolic resins
For injection molding, encapsulating, potting
No chlorinated solvents
Maximum operating temp: 450°F/232°C
Bulk versions of this product should be thoroughly stirred prior to use
Reference:
45812H
Brand:
Slide
Non-paintable silicone mold release
Effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams
Solvent-free dry formulation
Maximum operating temp: 500°F/260°C
Reference:
51932-1
Brand:
Slide
Water-based silicone oil solution
35% concentrate can be diluted with additional water
No chlorinated solvents
Approved for indirect food contact (†)
(†) Meets 21CFR 175.300 for release agents
Reference:
457CONC-05
Brand:
Slide
Food-grade active ingredient (†††)
Neutral white oil-based release; does not contain lecithin
Recognized by UL
Solvent-free dry formulation
Won’t turn color or turn rancid
Paintable, non-silicone
Excellent all-purpose mold release for use with most resins
Maximum operating temp: 600°F/315°C
A pure non-silicone oil (†††) 21CFR 172.878 and 178.3620 (a)
Reference:
401CONC-05
Brand:
Slide
Food-grade for indirect food contact (†)
Recommended for food-packaging molding
Recognized by UL
Solvent-free dry formulation
Allows for faster molding & more production
Maximum operating temp: 600°F/315°C
Effective mold release for investment wax casting
Pure silicone oil † Meets 21CFR 175.300 for release agents.
Reference:
42612H
Brand:
Slide
Non-silicone, paintable mold release concentrate
Food-grade active ingredient (†††)
Recognized by UL
Solvent-free dry formulation
Contains no lecithin
Safe to use on most thermoplastics
Use where parts must be painted, hot-stamped or metalized
Maximum operating temp: 600°F/315°C ††† 21CFR 172.878 and 178.3620 (a)
Price
$82.68
Product available for orders
