Payment & Delivery
Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
There are 59 products.
Reference: 40710P
Brand: Slide
Paintable Permits post-decorating of molded parts without prior cleaning No chlorinated solvents Maximum operating temp: 482°F/250°C Approved for indirect food contact (†) † 21CFR 178.3570
Reference: 40401B
Brand: Slide
Produces cleaner threads For reaming, dressing abrasive wheels, etc. Bio-degradable Made with natural oils No chlorinated solvents Effective on tool steel, stainless, aluminum, brass, bronze, zinc and other metals
Reference: 41812M
Brand: Slide
Non-silicone, PTFE-based formulation Penetrating formulation helps free rusted or frozen metal components Displaces moisture and leaves a protective film No chlorinated solvents Choice of spray or stream aerosol pattern Harmless to most plastics, rubber, paint, etc. Meets California CARB VOC standards
Reference: 40910P
Brand: Slide
Contains No Ozone Depleting Chemicals Non-Chlorinated No Methylene Chloride No ChloroFluorocarbons (CFC's) Cleans molds at room temperature without wiping
Reference: 473-45
Brand: Slide
Excellent purge for use through hot runner systems Safe to purge through the mold Helps eliminate color streaking and black specks Effectively removes old resin and color residue in extrusion, injection and blow molding operations
Reference: 43100M
Brand: Slide
Slide 43100M is a handheld sprayer designed for dispensing Slide cylinder products. Includes a spray bottle & cap with a metal hose.
Reference: 46710P
Brand: Slide
Ideal for mold assemblies used to produce food packaging NSF category H1 2-year protection* No chlorinated solvents Neutralizes fingerprint acids Bulk versions of this product should be thoroughly stirred prior to use *Protects up to two years under normal indoor storage conditions
Reference: 51932-1
Brand: Slide
Water-based silicone oil solution 35% concentrate can be diluted with additional water No chlorinated solvents Approved for indirect food contact (†) (†) Meets 21CFR 175.300 for release agents
Reference: 42510P
Brand: Slide
No chlorinated solvents Neutralizes corrosive vapors and prevents resin deposit build-up Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives Paintable, non-silicone release Maximum operating temp: 550°F/287°C
Reference: 46515
Brand: Slide
Citrus mold cleaner clings to surfaces for maximum performance Water-based high density foam Removes mold releases, dirt, oil and greases from mold surface No chlorinated solvents Helps break down resin and gas deposits that clog vents
Reference: 47908
Brand: Slide
Copper Anti-Seize compound for preventing thread damage by seizing and galling up to 1800ºF. Compatible with most metals and plastics Protects against rust and corrosion Improves assembly and disassembly without galling It will not harden, drip or separate Meets MIL-PRF-907F performance requirements
Reference: 41515
Brand: Slide
Just spray and wipe Ideal for cleaning plastic parts, and helps remove mold release prior to secondary operations No chlorinated solvents Safe on all plastics; contains no ammonia Pleasant, fresh scent Water-based cleaner with low VOCs
