Watlow Designs And Manufactures Industrial Heaters, Temperature Sensors, Controllers And Supporting Software As Well As Assemblies – All Of The Components Of A Thermal System. Watlow Holds More Than 200 Patents And Has More Than 2,000 Employees Working In 12 Facilities In The United States, Mexico, Europe and Asia.
Watlow Holds More Than 200 Patents And Employs 2,000 Employees Working In 12 Manufacturing Facilities In The United States, Mexico, Europe and Asia. Watlow Designs And Manufactures Industrial Heaters, Sensors And Controllers.
1-PC Mineral Insulated Band Heater
300w 120v (106w² Inch)
12" Fiberglass Insulated Leads
10" Stainless Steel Tight Braid Over Leads
Built In Mounting Clamp Bars
Stainless Steel Sheath
Similar to Chromalox MT-01015-0837
Comes wired 240v 3-phase delta in a general purpose wiring enclosure
It has (3) 316-ss passivated 17.625-inch immersed length heating elements
with expoxy resin end seals rated at 194ºF and provide up to 7.5kw
Also included is an integral thermowell for a sensor (sensor not included)
and a 30A DPST thermostat control from 30ºF to 110ºF with a 12º...
Comes wired 240v 3-phase delta in a general purpose wiring enclosure
it has (3) 316-ss passivated 10.625-inch immersed length heating elements
with epoxy resin end seals rated at 194°F with an integral thermowell
and DPST 30A thermostat control from 30°F to 110°F with differential up to 12°F
The heater has no heat the first 2.625 inches from the...
Comes with an explosion proof wiring enclosure and
(3) 316-ss passivated 7.625-inch immersed length heating elements
with epoxy resin element end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the screw plug and has
an approximate shipping weight of 9/lbs.
Comes with a 30-amp DPST 100-550°F thermostat with a differential setting up to 12°F
in a general purpose enclosure and with
(3) 316-ss passivated 7.625-inch immersed length heating elements
with epoxy resin end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the screw plug and has
an approximate ship...
(4) PID control loops with universal inputs with no output hardware and comes with Modbus RTU485 communications protocol and right angle screw connectors.
Zero Cross Fire Back to Back SCR Design
Hocky Puck Style
Maximum I²T Fusing Is 1620A²Seconds
Line Voltage 24~240Vac
Ambient Operating Temperature -40°F ~ 176°F
Thermal Resistance .63°F C/W
Internal Voltage Snubber
Includes Thermal Foil, Washers, And Screws For Mounting To A Heat Sink
Equal to Crydom D2440DEH and Potter & Brumfield SSRT-240D40
Line Voltage 120~240Vac 1-Phase
Control Voltage 100~120Vac
Din Rail Mount or Flat Panel Mounting
Back to Back SCR Design
Zero Cross Switching Up-To 25A@80°F (see table below)
On ~ Off Analog Controller
Input "T" Thermocouple
Output SPST 3-Amp Mechanical Relay
120Vac Line Voltage
Integral Set Point Front Dial
Dual Scale 14°F ~ 212°F, -10°c ~ 100°c
Panel Mount with .39"OD Hole in Center
Output #1 One 5-Amp Single Pole Double Throw Mechanical Relay
Output #2 One 5-Amp Single Pole Single Throw Mechanical Relay
One Universal Sensor Input
100~240V-AC
Micro Processor Based
High/Low Temperature Limit Controller
With Easy Set-Up Basic Menu
