Home
Mold Care Products

Mold Care Products

Active filters
43432

Reference: 43432

Brand: Slide

Slide 43432 P.D.Q. Purging Compound 32-oz Bottle

Concentrated liquid purging compound Water-based additive (use with barrel temperature above 212’F/100ºC) Can be mixed with any carrier resin Aids with resin-to-resin and color-to-color purges Choose self-measuring bottle or pre-measured packets Works with a carrier resin to remove unwanted contamination from the barrel assembly
$232.83
More Slide 43432 P.D.Q. Purging Compound 32-oz Bottle
In stock
43911P Aerosol

Reference: 43911P

Brand: Slide

Slide 43911P Super Grease

Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixotropic properties provide excellent mechanical stability when sudden temperature changes occur. A clear, clean, non-yellowing grease, Super Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also...
$122.02
More Slide 43911P Super Grease
In Stock
Slide 42202 Air-O-Spray

Reference: 42202

Brand: Slide

Slide 42202 Air-O-Spray

Slide 42202 Air-O-Spra sprayer utilizes compressed air at low pressure to atomize a low mist of spray. Included are a 12oz plastic spray bottle, 10' of braided hose, and 1/4" pipe-thread fitting. 
$135.00
More Slide 42202 Air-O-Spray
In stock
46410 Aerosol

Reference: 46410

Brand: Slide

Slide 46410 NEXGEN Cleaner

NSF category P1 Offers more cleaning strength than other “natural” mold cleaners Can be used to help break down resin deposits from the mold surface and clogged vents No chlorinated solvents
$85.67
More Slide 46410 NEXGEN Cleaner
In stock
42112N 11.5 Aerosol

Reference: 42112N

Brand: Slide

Slide 42112N Silicone Spray

Solvent-free dry formulation Approved As An Indirect Food Additive Recognized By Underwriters Laboratories Maximum operating temp: 600°F/315°C Classified NSF category M1
$89.94
More Slide 42112N Silicone Spray
In stock
45414 Aerosol

Reference: 45414

Brand: Slide

Slide 45414 Thermoset Mold Release

Made with synthetic carnauba wax Contains no silicones or oils Recommended for thermoset plastic resins No chlorinated solvents Ideal release for injection, compression and transfer molding Maximum operating temp 600°F/315°C
$112.00
More Slide 45414 Thermoset Mold Release
In stock
451-45 Box

Reference: 451-45

Brand: Slide

Slide 451-45 NuPurge Technology

Complete purging through reactive chemistry No need for multiple purging products Temp range: 160° - 600°F/71°C - 315°C Not for use with acetal or Delrin® Ready to use; no mixing required Run through gates as small as 30 microns FDA compliant - ingredients meet G.R.A.S. standards Aids with resin-to-resin and color-to-color purges Use with most resins
$209.88
More Slide 451-45 NuPurge Technology
In stock
44212 Aerosol

Reference: 44212

Brand: Slide

Slide 44212 On-Cycle Mold Cleaner

Use on warm molds at the press NSF category P1 Quickly removes mold release, grease and oil from mold surfaces No chlorinated solvents Can be used to help break down resin deposits from the mold surface and clogged vents
$93.83
More Slide 44212 On-Cycle Mold Cleaner
In stock
Back to top