Watlow Designs And Manufactures Industrial Heaters, Temperature Sensors, Controllers And Supporting Software As Well As Assemblies – All Of The Components Of A Thermal System. Watlow Holds More Than 200 Patents And Has More Than 2,000 Employees Working In 12 Facilities In The United States, Mexico, Europe and Asia.
Watlow Holds More Than 200 Patents And Employs 2,000 Employees Working In 12 Manufacturing Facilities In The United States, Mexico, Europe and Asia. Watlow Designs And Manufactures Industrial Heaters, Sensors And Controllers.
One Universal Input
Output #1 (E) - Mechanical Relay 5A, Form C
Output #2 (J) - Mechanical Relay 5A, Form A
Operating Voltage 100 ~ 240VAC
Auto-Tune PID Controller
PM Express Set-Up Menu
For Basic Heating/Cooling Applications
1-PC Mineral Insulated Band Heater
600w 120v
96"Fiberglass Insulated Leads
90deg. 90" Stainless Steel Braid Over Leads
Built In Mounting Clamp Bars
Stainless Steel Sheath
Comes wired 240v 3-phase delta in an explosion proof wiring enclosure
It has (3) 316-ss passivated 17.6250-inch immersed length heating elements
with epoxy resin end seals rated at 194ºF and provide up to 7.5kw
Also included is an integral thermowell for a sensor (sensor not included)
The heater has no heat the first 4.125-inches from the 2-1/2-inch NPT...
Comes wired 240v 3-phase delta in a general purpose wiring enclosure
it has (3) 316-ss passivated 10.625-inch immersed length heating elements
with epoxy resin end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the 2-1/2"npt screw plug
and has an approximate shipping weight of 10/lbs.
120V 1-phase 3.0kW
Explosion Proof Wiring Enclosure
2 1/2-inch NPT Screw Plug
WATROD elements
No heat the first 2.625 inches from the the 2-1/2"npt screw plug
(3) 316-ss passivated 7.625-inch immersed length heating elements
Epoxy resin end seals rated at 194°F and a thermowell for sensor
Comes with a general purpose wiring enclosure and a thermostat
DPST on/off from 60°F to 250°F with a differential up to 12°F
the heater has (3) 316-ss passivated 7.625-inch length heating elements
with epoxy resin end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the screw plug and has
an...
Input Voltage Range 93~132Vac / 186~264Vac
Output Voltage Can Be Adjusted From The Front Panel
Adjustable Output Voltage Range 22.5 ~ 28.5Vdc
Red & Green LED Indicators Provide Output Status
Operating Temperature -25° ~ +71°c
3.27"W x 4.92"L x 4.59"H 2.5/Lbs. Din Rail Mount
Zero cross fire
Back to back SCR design
Maximum I²T fusing is 60A²seconds
Line voltage 24~240Vac
Ambient operating temperature -40°F to +176°F
Thermal resistance 1.48°F C/W
Internal voltage snubber
Includes thermal foil, washers, and screws for mounting to a heat sink
Equal to Crydom D2410 and Potter & Brumfield SSRT-240D10
Line Voltage 120~240Vac 1-Phase
4~20mA Proportional Control
Din Rail Mount or Flat Panel Mounting
Back to Back SCR Design
Zero Cross Switching Up-To 25A@80°F (see table below)
Two Switched DC/Open Collector Outputs
PID Auto Tune Panel Mount Controller
Single User Selectable Input: T/C, RTD, 4~20ma, 0~5Vdc
100 ~ 240Vac Line Voltage
Dual Four Digit Red/Green Display
Nema 4x & CE Rated
For "How To" Videos and More Information Visit Google+ Plus
