Watlow Designs And Manufactures Industrial Heaters, Temperature Sensors, Controllers And Supporting Software As Well As Assemblies – All Of The Components Of A Thermal System. Watlow Holds More Than 200 Patents And Has More Than 2,000 Employees Working In 12 Facilities In The United States, Mexico, Europe and Asia.
Watlow Holds More Than 200 Patents And Employs 2,000 Employees Working In 12 Manufacturing Facilities In The United States, Mexico, Europe and Asia. Watlow Designs And Manufactures Industrial Heaters, Sensors And Controllers.
Comes wired 480v 3-phase delta in an explosion proof wiring enclosure
It has (3) 316-ss passivated 17.625-inch immersed length heating elements
with expoxy resin end seals rated at 194ºF and provide up to 7.5kw
Also included is an integral thermowell for a sensor (sensor not included)
The heater has no heat the first 4.125-inches from the 2-1/2-inch NPT...
Comes wired 240v 3-phase delta in an explosion proof wiring enclosure
it has (3) 316-ss passivated 10.625 inch immersed length
heating elements with epoxy resin end seals rated at194°F and a
thermowell for sensor. The heater has no heat the first 2.625 inches
from the 2-1/2"NPT screw plug and has an approximate shipping
weight of 15/lbs.
Comes with an explosion proof wiring enclosure and
(3) 316-ss passivated 7.625-inch immersed length heating elements
with epoxy resin element end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the screw plug and has
an approximate shipping weight of 9/lbs.
Comes with a DPST 60-250°F thermostat with a differential setting up to 12°F
in a general purpose enclosure and with
(3) 316-ss passivated 7.625-inch immersed length heating elements
with epoxy resin element end seals rated at 194°F and a thermowell for sensor.
The heater has no heat the first 2.625 inches from the screw plug and has
an approximate ship...
(4) PID control loops with universal inputs with no output hardware and comes with Modbus RTU485 communications protocol and right angle screw connectors and has Class 1, Division 2 hazardous location rating.
Input Voltage Range 100 ~ 240Vac
Output Voltage Can Be Adjusted From The Front Panel
Adjustable Output Voltage Range 24 ~ 28Vdc
Red & Green LED Indicators Provide Output Status
Class II Insulation Requires No Earth Ground
Operating Temperature -25° ~ +71°c
Low Profile Din-Rail Mount 2.2" deep
Zero cross fire
Back to back SCR design
Maximum I²T fusing is 60A² seconds
Line voltage 24~240Vac
Ambient operating temperature -40°F to +176°F
Thermal resistance 1.48°F C/W
Internal voltage snubber
Equal to Crydom A2410 and Potter & Brumfield SSRT-240A10
Line Voltage 277~600Vac 1-Phase
4~20mA Proportional Control
Din Rail Mount or Flat Panel Mounting
Back to Back SCR Design
Zero Cross Switching Up-To 25A@80°F (see table below)
Output #1 Switched DC/Open Collector
Output #2 One 5-Amp Single Pole Single Throw Mechanical Relay
One Universal Sensor Input
12~28V-AC/DC
Micro Processor Based
High/Low Temperature Limit Controller
With Easy Set-Up Basic Menu
One Universal Input
Output #1 (F) - Universal Process
Output #2 (K) - 0.5A Solid State Relay (Form A)
Range Selectable Analog either 0 ~ 10VDC or 0 ~ 20mA
Operating Voltage 100 ~ 240VAC
Auto-Tune PID Controller
PM Express Set-Up Menu
For Basic Heating/Cooling Application
One Universal Input
Output #1 (F) - Universal Process
Output #2 (K) - SSR Form A, 0.5A
Operating Voltage 100 ~ 240VAC
Auto-Tune PID Controller
PM Express Set-Up Menu
For Basic Heating/Cooling Applications
