BLR710L3C explosion proof immersion heater

BLR710L3C screw plug immersion heater

Reference BLR710L3C

Brand Watlow Electric Mfg.

Comes wired 240v 3-phase delta in an explosion proof wiring enclosure
it has (3) 316-ss passivated 10.625 inch immersed length
heating elements with epoxy resin end seals rated at194°F and a
thermowell for sensor. The heater has no heat the first 2.625 inches
from the 2-1/2"NPT screw plug and has an approximate shipping
weight of 15/lbs.

$2,327.00

Quantity

Last items in stock

In stock: 1 Item

Security policy

(edit with the Customer Reassurance module)

Delivery policy

(edit with the Customer Reassurance module)

Return policy

(edit with the Customer Reassurance module)

Description
Product Details

Description

2-1/2"NPT Screw Plug Immersion Heater | BLR710L3C

Applications that require heating Deionized/Demineralized Water

Steam boilers and cooling systems
Manufacturing lead-acid batteries
Car washes
Electronics manufacturing
Medical and Pharmaceutical manufacturing
Cleaning processes
Manufacturing Cosmetics and Personal Care Products

Features & Benefits of the Watlow® immersion heater

The integral thermowell provides a convenient method for temperature sensor insertion and allowing a replacement without draining the fluid being heated. The WATROD™ hairpin bend is re-compacted to maintain the mineral insulation density and maintain the dielectric strength and heat transfer efficiency. The heating element has a bright annealing passivation for corrosion resistance.

NOTE: A NEMA-7 enclosure designated for locations classified as Class-1, Division-1, Groups A,B,C, or D as defined in NFPA 70 is installed on this heater; however, is NOT CERTIFIED as installed on the heater. To obtain CSA certification as explosion proof Class-1, Groups B,C,D as installed on the heater, the end user must provide Watlow® the following intended process conditions: operating temperature, operating pressure, media type being heated, including the installation orientation of the heater (horizontal or vertical).

One conduit hub is supplied as per drawing.

Product Details

Reference BLR710L3C

In stock 1 Item

4 other products in the same category:

Reference: BLR717L3S4

Brand: Watlow Electric Mfg.

BLR717L3S4 screw plug immersion heater

Comes wired 240v 3-phase delta in a general purpose wiring enclosure It has (3) 316-ss passivated 17.625-inch immersed length heating elements with expoxy resin end seals rated at 194ºF and provide up to 7.5kw Also included is an integral thermowell for a sensor (sensor not included) and a 30A DPST thermostat control from 30ºF to 110ºF with a 12º...

$2,574.00

Last items in stock

Reference: BLR717L3C

Brand: Watlow Electric Mfg.

BLR717L3C screw plug immersion heater

Comes wired 240v 3-phase delta in an explosion proof wiring enclosure It has (3) 316-ss passivated 17.6250-inch immersed length heating elements with epoxy resin end seals rated at 194ºF and provide up to 7.5kw Also included is an integral thermowell for a sensor (sensor not included) The heater has no heat the first 4.125-inches from the 2-1/2-inch NPT...

$2,389.00

Last items in stock

Reference: BLR714L3S4

Brand: Watlow Electric Mfg.

BLR714L3S4 screw plug immersion heater

Comes wired 240v 3-phase delta in a general purpose wiring enclosure It has (3) 316-ss passivated 14.625-inch immersed length heating elements with epoxy resin end seals rated at 194ºF and provide up to 6kw Also included is an integral thermowell for a sensor (sensor not included) and a 30A DPST thermostat control from 30ºF to 110ºF with a 12º...

$2,549.00

Last items in stock

Reference: BLR77L3S

Brand: Watlow Electric Mfg.

BLR77L3S screw plug immersion heater

Comes with a general purpose wiring enclosure and (3) 316-ss passivated 7.625-inch immersed length heating elements with epoxy resin element end seals rated at 194°F and a thermowell for sensor. The heater has no heat the first 2.625 inches from the screw plug and has an approximate shipping weight of 6/lbs.

$2,030.00

Last items in stock