Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Complete purging through reactive chemistry
No need for multiple purging products
Temp range: 160° - 600°F/71°C - 315°C
Not for use with acetal or Delrin®
Ready to use; no mixing required
Run through gates as small as 30 microns
FDA compliant - ingredients meet G.R.A.S. standards
Aids with resin-to-resin and color-to-color purges
Use with most resins
Protects molds when using PVC and flame-retardant resins
Provides dual protection against moisture and hydrochloric acids
No chlorinated solvents
One-step rust preventive
Bulk versions of this product should be thoroughly stirred prior to use
Use on warm molds at the press
NSF category P1
Quickly removes mold release, grease and oil from mold surfaces
No chlorinated solvents
Can be used to help break down resin deposits from the mold surface and clogged vents
Excellent for use through hot runner systems
Safe to purge through the mold
GRAS rated (food-grade) active ingredients safe for food packaging applications
Helps eliminate color streaking and black specks
Chemically reactive compound
Polyolefin resin carrier
Operating temperatures of 330° - 610°F/165°C - 321°C
For use with injection molding, extrusion...
Recognized by UL
Allows molded parts to be painted or decorated post-molding
Light-duty mold release
Solvent-free dry formulation
Maximum operating temp: 650°F/343°C
Rechargeable Aerosol Sprayer:
Indestructible Stainless Steel Bottle
Uses Various Spray Tips & Valves
Sprays Similar To Aerosol Cans
Fill With Favorite Product & Up To 150-PSI Of Air
Extremely Dependable Polyacetal Construction
Non-silicone, PTFE-based formulation
Penetrating formulation helps free rusted or frozen metal components
Displaces moisture and leaves a protective film
No chlorinated solvents
Choice of spray or stream aerosol pattern
Harmless to most plastics, rubber, paint, etc.
Meets California CARB VOC standards
Food-grade for indirect food contact (††)
Very low odor
Quickly removes mold release, grease, oil and wax build-up on mold surfaces
No chlorinated solvents
Excellent for use through hot runner systems
Safe to purge through the mold
GRAS rated (food-grade) active ingredients safe for food packaging applications
Helps eliminate color streaking and black specks
Chemically reactive compound
Polyolefin resin carrier
Operating temperatures of 330° - 610°F/165°C - 321°C
For use with injection molding, extrusion...
