Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
No chlorinated solvents
Neutralizes corrosive vapors and prevents resin deposit build-up
Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives
Paintable, non-silicone release
Maximum operating temp: 550°F/287°C
Food-grade active ingredient (†††)
Neutral white oil-based release; does not contain lecithin
Recognized by UL
Solvent-free dry formulation
Won’t turn color or turn rancid
Paintable, non-silicone
Excellent all-purpose mold release for use with most resins
Maximum operating temp: 600°F/315°C
A pure non-silicone oil is also offered (part #457CONC). Call...
Non-silicone, paintable mold release
Mold release powder
Use for polycarbonate, polypropylene, polysulfone and rubber molding
No chlorinated solvents
Maximum operating temp: 600°F/315°C
Approved for indirect food contact (†)
Water-based formulation
No chlorinated solvents
Use on molds 212°F/100°C and above
Maximum operating temp: 600°F/315°C
† Meets 21CFR 175.300 for release agents.
Recognized by UL
Food-grade for indirect food contact (†)
Fast-drying on cold and hot molds
No chlorinated solvents
Maximum operating temp: 600°F/315°C
(†) Meets 21CFR 175.300 for release agents.
Non-silicone, synthetic wax-based product
For epoxy, polyester and phenolic resins
For injection molding, encapsulating, potting
No chlorinated solvents
Maximum operating temp: 450°F/232°C
Bulk versions of this product should be thoroughly stirred prior to use
Water-based silicone oil solution
35% concentrate can be diluted with additional water
No chlorinated solvents
Approved for indirect food contact (†)
(†) Meets 21CFR 175.300 for release agents
Food-grade active ingredient (†††)
Neutral white oil-based release; does not contain lecithin
Recognized by UL
Solvent-free dry formulation
Won’t turn color or turn rancid
Paintable, non-silicone
Excellent all-purpose mold release for use with most resins
Maximum operating temp: 600°F/315°C
A pure non-silicone oil (†††) 21CFR 172.878 and 178.3620 (a)
Food-grade for indirect food contact (†)
Recommended for food-packaging molding
Recognized by UL
Solvent-free dry formulation
Allows for faster molding & more production
Maximum operating temp: 600°F/315°C
Effective mold release for investment wax casting
Pure silicone oil † Meets 21CFR 175.300 for release agents.
Non-silicone, paintable mold release concentrate
Food-grade active ingredient (†††)
Recognized by UL
Solvent-free dry formulation
Contains no lecithin
Safe to use on most thermoplastics
Use where parts must be painted, hot-stamped or metalized
Maximum operating temp: 600°F/315°C ††† 21CFR 172.878 and 178.3620 (a)
