Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Neutralizes Fingerprints
Non-Silicone / Non-Wax
Self-Cleaning In Start-Up
Seals Out Condensation
Does Not Leach Out Of Mold Crevices And Mark Parts
No Ozone Depleting Chemicals
Excellent Overnight Protection
10/Oz Net Weight Aerosol Can
Slide’s most popular mold cleaner formulation
NSF category P1
Evaporates fast, leaves no residue
Contains no chlorinated solvents
NSF-certified as safe for use on food machinery and molds
Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixotropic properties provide excellent mechanical stability when sudden temperature changes occur. A clear, clean, non-yellowing grease, Super Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also...
5 year protection*
Displaces moisture while sealing mold from outside condensation
Non-silicone, non-wax formulation
No chlorinated solvents
Neutralizes fingerprint acids
*Protects up to five years under normal indoor storage conditions
NSF category P1
Offers more cleaning strength than other “natural” mold cleaners
Can be used to help break down resin deposits from the mold surface and clogged vents
No chlorinated solvents
Made with synthetic carnauba wax
Contains no silicones or oils
Recommended for thermoset plastic resins
No chlorinated solvents
Ideal release for injection, compression and transfer molding
Maximum operating temp 600°F/315°C
Protects molds when using PVC and flame-retardant resins
Provides dual protection against moisture and hydrochloric acids
No chlorinated solvents
One-step rust preventive
Bulk versions of this product should be thoroughly stirred prior to use
Use on warm molds at the press
NSF category P1
Quickly removes mold release, grease and oil from mold surfaces
No chlorinated solvents
Can be used to help break down resin deposits from the mold surface and clogged vents
Recognized by UL
Allows molded parts to be painted or decorated post-molding
Light-duty mold release
Solvent-free dry formulation
Maximum operating temp: 650°F/343°C
Non-silicone, PTFE-based formulation
Penetrating formulation helps free rusted or frozen metal components
Displaces moisture and leaves a protective film
No chlorinated solvents
Choice of spray or stream aerosol pattern
Harmless to most plastics, rubber, paint, etc.
Meets California CARB VOC standards
