Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Spray system for dispensing Slide aerosol cylinder products includes:
An easy to program control unit
A proximity sensor with 6-ft cord
10-ft of spray hose
2 spray nozzles
5-ft of source tank hose
A 10-ft power cord
Concentrated liquid purging compound
Water-based additive (use with barrel temperature above 212’F/100ºC)
Can be mixed with any carrier resin
Aids with resin-to-resin and color-to-color purges
Choose self-measuring bottle or pre-measured packets
Works with a carrier resin to remove unwanted contamination from the barrel assembly
Neutralizes Fingerprints
Non-Silicone / Non-Wax
Self-Cleaning In Start-Up
Seals Out Condensation
Does Not Leach Out Of Mold Crevices And Mark Parts
No Ozone Depleting Chemicals
Excellent Overnight Protection
10/Oz Net Weight Aerosol Can
Slide’s most popular mold cleaner formulation
NSF category P1
Evaporates fast, leaves no residue
Contains no chlorinated solvents
NSF-certified as safe for use on food machinery and molds
Super Grease will not separate, run or fall out and has exceptional load-bearing properties. Thixotropic properties provide excellent mechanical stability when sudden temperature changes occur. A clear, clean, non-yellowing grease, Super Grease is ideal for injection molds, mold assemblies, and especially medical and food grade plastic parts. It also...
Slide 42202 Air-O-Spra sprayer utilizes compressed air at low pressure to atomize a low mist of spray. Included are a 12oz plastic spray bottle, 10' of braided hose, and 1/4" pipe-thread fitting.
5 year protection*
Displaces moisture while sealing mold from outside condensation
Non-silicone, non-wax formulation
No chlorinated solvents
Neutralizes fingerprint acids
*Protects up to five years under normal indoor storage conditions
NSF category P1
Offers more cleaning strength than other “natural” mold cleaners
Can be used to help break down resin deposits from the mold surface and clogged vents
No chlorinated solvents
Copper Anti-Seize compound for preventing thread damage by seizing and galling up to 1800ºF.
Compatible with most metals and plastics
Protects against rust and corrosion
Improves assembly and disassembly without galling
It will not harden, drip or separate
Meets MIL-PRF-907F performance requirements
Made with synthetic carnauba wax
Contains no silicones or oils
Recommended for thermoset plastic resins
No chlorinated solvents
Ideal release for injection, compression and transfer molding
Maximum operating temp 600°F/315°C
