Mold Care Products (4)

Reference: 47212

Slide 47212 Isopropyl Alcohol Cleaner

NSF category P1 Evaporates fast and leaves no residue California VOC compliant aerosol (74.9% VOC) No chlorinated solvents 99% isopropyl alcohol

$83.73

In stock

Reference: 40710P

Brand: Slide

Slide 40710P Econo-Spray® No. 2 Mold Release

Paintable Permits post-decorating of molded parts without prior cleaning No chlorinated solvents Maximum operating temp: 482°F/250°C Approved for indirect food contact (†) † 21CFR 178.3570

$67.53

In stock

Reference: 40810P

Brand: Slide

Slide 40810P Econo-Spray® No.3 Mold Release

Non-silicone and paintableFood-grade active ingredient (†)No chlorinated solventsMaximum operating temp: 600°F/315°C (†) 21CFR 178.3570

$66.96

In stock

Reference: 41412

Brand: Slide

Slide 41412 Polycarbonate Heavy Duty Mold Release

Paintable release, will not interfere with post-molding decorating of parts Specifically developed as a release for polycarbonate resin Recognized by UL Solvent-free dry formulation Maximum operating temp: 650°F/343°C

$102.61

In stock

Reference: 42612H

Brand: Slide

Slide 42612 Universal Mold Release

Non-silicone, paintable mold release Food-grade active ingredient (†††) Recognized by UL Solvent-free dry formulation Contains no lecithin Safe to use on most thermoplastics Use where parts must be painted, hot-stamped or metalized Maximum operating temp: 600°F/315°C ††† 21CFR 172.878 and 178.3620 (a)

$84.95

In stock

Reference: 41112N

Brand: Slide

Slide 41112N DFL Dry Film Lube (Fluorocarbon) Mold Release

Formulated for deep draw molds Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl No chlorinated solvents Use it on phenolic & urethane resins Contains PTFE Maximum operating temp: 500°F/260°C Bulk versions of this product should be thoroughly stirred prior to use

$149.66

In stock

Reference: 44110A

Brand: Slide

Slide 44110A Hi-Temp 1800 Mold Release

Paintable, non-silicone release contains boron nitride Effective release for engineering grade resins, low melting point metals and glass Recommended for use with Ultem and other engineering-grade resins High temperature mold release agent No chlorinated solvents Maximum operating temp: 1800°F/982°C

$139.66

In stock

Reference: 46612N

Brand: Slide

Slide 46612N Knock Out Mold Release

Paintable, non-silicone Approved for indirect food contact (†) Solvent-free dry formulation Maximum operating temp: 450°F/232°C † 21CFR 178.3570

$83.98

In stock

Reference: 42510P

Brand: Slide

Slide 42510P Mold Saver Mold Release

No chlorinated solvents Neutralizes corrosive vapors and prevents resin deposit build-up Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives Paintable, non-silicone release Maximum operating temp: 550°F/287°C

$72.65

In stock

Reference: 45712N

Brand: Slide

Slide 45712N Pure Eze Mold Release

Food-grade active ingredient (†††) Neutral white oil-based release; does not contain lecithin Recognized by UL Solvent-free dry formulation Won’t turn color or turn rancid Paintable, non-silicone Excellent all-purpose mold release for use with most resins Maximum operating temp: 600°F/315°C A pure non-silicone oil is also offered (part #457CONC). Call...

$89.94

In stock

Reference: 41012N

Brand: Slide

Slide 41012N Zinc Stearate Mold Release

Non-silicone, paintable mold release Mold release powder Use for polycarbonate, polypropylene, polysulfone and rubber molding No chlorinated solvents Maximum operating temp: 600°F/315°C

$84.39

In stock

Reference: 44312

Brand: Slide

Slide 44312 Environmentally Safe Mold Release

Approved for indirect food contact (†) Water-based formulation No chlorinated solvents Use on molds 212°F/100°C and above Maximum operating temp: 600°F/315°C † Meets 21CFR 175.300 for release agents.

$60.84

In stock