Slide 41112N DFL Dry Film Lube (Fluorocarbon) Mold Release

Reference 41101HB

Brand Slide

Formulated for deep draw molds
Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
No chlorinated solvents
Use it on phenolic & urethane resins
Contains PTFE
Maximum operating temp: 500°F/260°C
Bulk versions of this product should be thoroughly stirred prior to use

Package Distribution

$61.94

Quantity

In stock: 4 Items

Security policy

(edit with the Customer Reassurance module)

Delivery policy

(edit with the Customer Reassurance module)

Return policy

(edit with the Customer Reassurance module)

Description

Slide 41112N Dry Film Lube (Fluorocarbon) Mold Release - DFL®

Slide 41112N Dry Film Lube (Fluorocarbon) Mold Release is an excellent, fast-drying lubricant for injection molding where clarity and deep draw are important, especially with hard, brittle resins. DFL® will not create “hydraulic effect” on deep drafted molds. Its “dry” formulation will not pick up dust or dirt and remains inert when exposed to corrosive reagents.

Slide 4412N MSDS Available from the attachments tab along with instructional videos.

NOTE: Slide Products are developed for plastics processors and fabricators, including mold and tool builders or MRO applications in general industry. They are not formulated for home use. These products will not be shipped to a residential address and are not intended as retail products.

Product Details

Reference 41101HB

In stock 4 Items

Specific References

UPC: 858799000943
MPN: 41112N

Attachments

Download

Slide MSDS 411H bulk

Download (2.61KB)

Slide MSDS 41112N aerosol

Download (2.61KB)

4 other products in the same category:

Reference: 46612N

Brand: Slide

Slide 46612N Knock Out Mold Release

Paintable, non-silicone Approved for indirect food contact (†) Solvent-free dry formulation Maximum operating temp: 450°F/232°C † 21CFR 178.3570

$83.98

In stock

Reference: 42510P

Brand: Slide

Slide 42510P Mold Saver Mold Release

No chlorinated solvents Neutralizes corrosive vapors and prevents resin deposit build-up Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives Paintable, non-silicone release Maximum operating temp: 550°F/287°C

$72.65

In stock

Reference: 51932-1

Brand: Slide

Slide 51932 Silicone Emulsion

Water-based silicone oil solution 35% concentrate can be diluted with additional water No chlorinated solvents Approved for indirect food contact (†) (†) Meets 21CFR 175.300 for release agents

$97.91

In stock

Reference: 44612

Brand: Slide

Slide 44612 Quick Silicone Mold Release

Recognized by UL Food-grade for indirect food contact (†) Fast-drying on cold and hot molds No chlorinated solvents Maximum operating temp: 600°F/315°C (†) Meets 21CFR 175.300 for release agents.

$83.97

In stock