Payment & Delivery
Distributors to the manufacturing industry
There are 2064 products.
Reference: 1554PB2
Brand: Hammond Manufacturing
6.3" x 3.5" x 2.4" Accepts 30.5mm push buttons Preformed silicone gasket Polycarbonate RAL‐7035 is UL 508A approved Includes 4 cover screws RoHS compliant Made in Canada
Reference: BLR717L3S
Brand: Watlow Electric Mfg.
Comes wired 240v 3-phase delta in a general purpose wiring enclosure It has (3) 316-ss passivated 17.6250-inch immersed length heating elements with epoxy resin end seals rated at 194ºF and provide up to 7.5kw Also included is an integral thermowell for a sensor (sensor not included) The heater has no heat the first 4.125-inches from the 2-1/2-inch NPT...
Reference: BLR714L5C
Brand: Watlow Electric Mfg.
Comes wired 480v 3-phase delta in an explosion proof wiring enclosure It has (3) 316-ss passivated 14.625-inch immersed length heating elements with epoxy resin end seals rated at 194ºF and provide up to 6kw Also included is an integral thermowell for a sensor (sensor not included) The heater has no heat the first 2.1875-inches from the 2-1/2-inch NPT...
Reference: BLR714L3C
Brand: Watlow Electric Mfg.
Comes wired 240v 3-phase delta in an explosion proof wiring enclosure it has (3) 316-ss passivated 14.625-inch immersed length heating elements with epoxy resin end seals rated at 194ºF providing up to 6kw. The heater comes with an integral thermowell for a sensor (sensor not included) The heater has no heat the first 2.1875-inches from the 2-1/2 inch...
Reference: BLR710L1C
Brand: Watlow Electric Mfg.
Wired 120V 1-phase parallel in an explosion proof wiring enclosure it has (3) 316-ss passivated 10.625-inch immersed length heating elements with epoxy resin end seals rated at 194°F and a thermowell for sensor. The heater has no heat the first 2.625 inches from the 2 1/2-inch NPT Screw Plug and has an approximate shipping weight of 12/lbs.
Reference: BLR77L5C
Brand: Watlow Electric Mfg.
Comes with an explosion proof wiring enclosure and (3) 316-ss passivated 7.625-inch immersed length heating elements with epoxy resin element end seals rated at 194°F and a thermowell for sensor. The heater has no heat the first 2.625 inches from the screw plug and has an approximate shipping weight of 9/lbs.
Reference: BLR77L3C
Brand: Watlow Electric Mfg.
Comes with an explosion proof wiring enclosure and (3) 316-ss passivated 7.625-inch immersed length heating elements with epoxy resin element end seals rated at 194°F and a thermowell for sensor. The heater has no heat the first 2.625 inches from the screw plug and has an approximate shipping weight of 9/lbs.
Reference: BLR77L1C
Brand: Watlow Electric Mfg.
120V 1-phase 3.0kW Explosion Proof Wiring Enclosure 2 1/2-inch NPT Screw Plug WATROD elements No heat the first 2.625 inches from the the 2-1/2"npt screw plug (3) 316-ss passivated 7.625-inch immersed length heating elements Epoxy resin end seals rated at 194°F and a thermowell for sensor
Reference: MB1A1AN3-B12
Brand: Watlow Electric Mfg.
1-PC Mineral Insulated Band Heater 200w 120v (122w² Inch) 12" Fiberglass Insulated Leads 10" Stainless Steel Tight Braid Over Leads Built In Mounting Clamp Bars Stainless Steel Sheath
Reference: HBL430P7W
Brand: Hubbell
Hubbell non-metallic pin and sleeve male plug: Cable cord clamp range from .375" up to 1.25" Terminal copper wire range from 12awg up to 8awg Housing is watertight Nylon Neoprene gasket and cable glands Brass conductor pins including ground Good for 1000 connect and disconnect cycles at full load Maximum continuous temperature rated at 167°F Previous...
Reference: RMC1AAAAAAAAAAB
Brand: Watlow Electric Mfg.
Right angle connectors hardware only. For use with Watlow Ez-Zone RMC controller modules.
Reference: PM3C1CC-AAAAAAA
Brand: Watlow Electric Mfg.
One Universal Input Output #1 (C) - Switched DC/Open Collector Output #2 (C) - Switched DC/Open Collector Operating Voltage 100 to 240VAC Auto-Tune PID Controller With Extensive Menu Options For Various Process Control Applications
