Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Concentrated liquid purging compound
Water-based additive (use with barrel temperature above 212’F/100ºC)
Can be mixed with any carrier resin
Aids with resin-to-resin and color-to-color purges
Choose self-measuring bottle or pre-measured packets
Works with a carrier resin to remove unwanted contamination from the barrel assembly
Slide’s most popular mold cleaner formulation
NSF category P1
Evaporates fast, leaves no residue
Contains no chlorinated solvents
NSF-certified as safe for use on food machinery and molds
NSF category P1
Offers more cleaning strength than other “natural” mold cleaners
Can be used to help break down resin deposits from the mold surface and clogged vents
No chlorinated solvents
Complete purging through reactive chemistry
No need for multiple purging products
Temp range: 160° - 600°F/71°C - 315°C
Not for use with acetal or Delrin®
Ready to use; no mixing required
Run through gates as small as 30 microns
FDA compliant - ingredients meet G.R.A.S. standards
Aids with resin-to-resin and color-to-color purges
Use with most resins
Excellent for use through hot runner systems
Safe to purge through the mold
GRAS rated (food-grade) active ingredients safe for food packaging applications
Helps eliminate color streaking and black specks
Chemically reactive compound
Polyolefin resin carrier
Operating temperatures of 330° - 610°F/165°C - 321°C
For use with injection molding, extrusion...
Recognized by UL
Allows molded parts to be painted or decorated post-molding
Light-duty mold release
Solvent-free dry formulation
Maximum operating temp: 650°F/343°C
Excellent for use through hot runner systems
Safe to purge through the mold
GRAS rated (food-grade) active ingredients safe for food packaging applications
Helps eliminate color streaking and black specks
Chemically reactive compound
Polyolefin resin carrier
Operating temperatures of 330° - 610°F/165°C - 321°C
For use with injection molding, extrusion...
Also known as “Old Yellow”
Water-based liquid mold cleaner
Removes stains and mold deposits
Conditions your mold for faster startups and improved release properties
Protects the mold as it cleans
Particle size <5 micron
Food-grade for indirect food contact (†)
Non-paintable silicone
Recognized by UL
No chlorinated solvents
Safe to use on most resins
Maximum operating temp: 600°F/315°C
(†) Meets 21CFR 175.300 for release agents.
NSF category M1
Recognized by UL
Light-duty silicone release
Solvent-free dry formulation
Reviewed and Approved by Health Canada
Maximum operating temperature: 600°F / 315°C
