Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Paintable
Permits post-decorating of molded parts without prior cleaning
No chlorinated solvents
Maximum operating temp: 482°F/250°C
Approved for indirect food contact (†)
† 21CFR 178.3570
Paintable release, will not interfere with post-molding decorating of parts
Specifically developed as a release for polycarbonate resin
Recognized by UL
Solvent-free dry formulation
Maximum operating temp: 650°F/343°C
Non-silicone, paintable mold release
Food-grade active ingredient (†††)
Recognized by UL
Solvent-free dry formulation
Contains no lecithin
Safe to use on most thermoplastics
Use where parts must be painted, hot-stamped or metalized
Maximum operating temp: 600°F/315°C
††† 21CFR 172.878 and 178.3620 (a)
Formulated for deep draw molds
Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
No chlorinated solvents
Use it on phenolic & urethane resins
Contains PTFE
Maximum operating temp: 500°F/260°C
Bulk versions of this product should be thoroughly stirred prior to use
Paintable, non-silicone release contains boron nitride
Effective release for engineering grade resins, low melting point metals and glass
Recommended for use with Ultem and other engineering-grade resins
High temperature mold release agent
No chlorinated solvents
Maximum operating temp: 1800°F/982°C
No chlorinated solvents
Neutralizes corrosive vapors and prevents resin deposit build-up
Helps protect against corrosive hydrochloric acids from PVC resin and flame-retardant additives
Paintable, non-silicone release
Maximum operating temp: 550°F/287°C
Food-grade active ingredient (†††)
Neutral white oil-based release; does not contain lecithin
Recognized by UL
Solvent-free dry formulation
Won’t turn color or turn rancid
Paintable, non-silicone
Excellent all-purpose mold release for use with most resins
Maximum operating temp: 600°F/315°C
A pure non-silicone oil is also offered (part #457CONC). Call...
Non-silicone, paintable mold release
Mold release powder
Use for polycarbonate, polypropylene, polysulfone and rubber molding
No chlorinated solvents
Maximum operating temp: 600°F/315°C
Approved for indirect food contact (†)
Water-based formulation
No chlorinated solvents
Use on molds 212°F/100°C and above
Maximum operating temp: 600°F/315°C
† Meets 21CFR 175.300 for release agents.
Recognized by UL
Food-grade for indirect food contact (†)
Fast-drying on cold and hot molds
No chlorinated solvents
Maximum operating temp: 600°F/315°C
(†) Meets 21CFR 175.300 for release agents.
