Slide Produces Mold Care Products Used In The Plastics Injection Molding Process. Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.
Formerly Percy Harms Corporation founded in 1953 is well known and respected within the plastics industry for it's formulation products of mold release agents, mold cleaners, rust preventives, purging compounds, and lubricants. Seventy percent (70%) of Slide Products are primarily used in the plastic injection molding industry and the balance of their products are used in extrusion molding, blow molding, film & sheet molding including vacuum forming/thermoforming and potting/encapsulating.
Non-silicone, PTFE-based formulation
Penetrating formulation helps free rusted or frozen metal components
Displaces moisture and leaves a protective film
No chlorinated solvents
Choice of spray or stream aerosol pattern
Harmless to most plastics, rubber, paint, etc.
Meets California CARB VOC standards
Food-grade for indirect food contact (††)
Very low odor
Quickly removes mold release, grease, oil and wax build-up on mold surfaces
No chlorinated solvents
Food-grade for indirect food contact (†)
Recommended for food-packaging molding
Recognized by UL
Solvent-free dry formulation
Allows for faster molding & more production
Maximum operating temp: 600°F/315°C
Effective mold release for investment wax casting
A pure silicone oil is also offered (part #401CONC). Call for details.
† Meets 21CFR 175.300 for...
Red tracing dye helps ensure complete coverage
2-year protection*
Will not bleed out and mark parts
No chlorinated solvents
Unique “dry” formula
Neutralizes fingerprint acid
Non-silicone, non-wax formulation
Seals out condensation
Bulk versions of this product should be thoroughly stirred prior to use
*Protects up to two years under normal indoor storage...
Also known as “Old Yellow”
Water-based liquid mold cleaner
Removes stains and mold deposits
Conditions your mold for faster startups and improved release properties
Protects the mold as it cleans
Particle size <5 micron
Excellent purge for use through hot runner systems
Safe to purge through the mold
Helps eliminate color streaking and black specks
Effectively removes old resin and color residue in extrusion, injection and blow molding operations
Ideal for mold assemblies used to produce food packaging
NSF category H1
2-year protection*
No chlorinated solvents
Neutralizes fingerprint acids
Bulk versions of this product should be thoroughly stirred prior to use
*Protects up to two years under normal indoor storage conditions
Food-grade for indirect food contact (†)
Non-paintable silicone
Recognized by UL
No chlorinated solvents
Safe to use on most resins
Maximum operating temp: 600°F/315°C
(†) Meets 21CFR 175.300 for release agents.
NSF category M1
Recognized by UL
Light-duty silicone release
Solvent-free dry formulation
Reviewed and Approved by Health Canada
Maximum operating temperature: 600°F / 315°C
Citrus mold cleaner clings to surfaces for maximum performance
Water-based high density foam
Removes mold releases, dirt, oil and greases from mold surface
No chlorinated solvents
Helps break down resin and gas deposits that clog vents
Contains No Ozone Depleting Chemicals
Non-Chlorinated
No Methylene Chloride
No ChloroFluorocarbons (CFC's)
Cleans molds at room temperature without wiping
Paintable mold release
Fast-drying on cold and hot molds
No chlorinated solvents
Maximum operating temp: 482°F/250°C
Approved for indirect food contact (†)
† 21CFR 178.3570
