Online products

Resources

Manufacturers

    When should a Rust Preventive be used on molds?

    Molds are an expensive investment that require protection. Rust on molds result in defective molded parts and incurs an expense in repair costs in addition to lost production due to down time. Molds pulled from production, should be thoroughly cleaned, inspected, and coated on the inside and the outside with a rust preventive. The short term storage of molds under 30 days and the long term storage over 30 days requires protection from humidity with a coating of an effective rust preventive.

    What type of Antioxidant should be used on molds?

    The length of storage should determine the type of rust preventive used. Slide products formulate its rust preventives for both short term and long term protection. Before storage of the thoroughly cleaned mold it is highly recommended the mold be sprayed with a neutralizer to remove any acids present and then apply the rust preventive. Slide knows the importance of effective protection and offers FREE SAMPLES for trial evaluation for the asking.


    Watch Slide Videos on how to apply Slide Antioxidants

     


    Slide Wet Formula Rust Preventives


     


    Acid Vapor Neutralizer

    • No chlorinated solvents
    • Protection when molding PVC & flame retardant resins
    • Provides dual protection against moisture & acids
    • A one-step rust preventive

    Acid Vapor Neutralizer is formulated to protect stored plastic molding dies from corrosive attack by hydrochloric and hydrobromic acids, as well as most common atmospheric corrosives & fingerprint acids. Length of protection is dependent on amount of PVC & flame-retardant being molded.

    Acid Vapor Neutralizer
    Manufactured by: Slide

    No. 44011, Net Wt. 11 oz. | msds
    No. 4405HB, 5-gallon | msds
    No. 44055HB, 55-gallon | msds

    shop Slide Acid Vapor Neutralizer
    Purchase Slide Acid Vapor Neutralizer

     


    No-Rust®

    • No chlorinated solvents
    • 5 year protection*
    • Non-silicone, non-wax formulation
    • Neutralizes fingerprint acids

    No-Rust® is a one-step rust preventive that contains both neutralizer & rust preventive. It provides positive protection by displacing moisture from metal surfaces & adhering tightly to the surface. Ideal for mold & die protection, it works on stamping dies, stripper plates, jigs & fixtures, rubber mold dies, die casting dies, precision instruments, machine tools & machined or ground steel of all kinds. Accurate spray pattern concentrates protection in normally inaccessible crevices.
    *Protects up to 5 years under normal indoor storage conditions.

    No-Rust®
    Manufactured by: Slide

    No. 40212, Net Wt. 12 oz. | msds
    No. 40235, cylinder | msds
    No. 40201B, 1-gallon | msds
    No. 40205B, 5-gallon | msds
    No. 40255B, 55-gallon | msds

    Shop Slide No-Rust®
    Purchase Slide No-Rust®

     



    Penetrant Plus®

    • No chlorinated solvents
    • Non-silicone, PTFE-based formulation
    • Choice of spray or stream aerosol pattern
    • Harmless to most plastics, rubber, paint, etc.
    • Displaces moisture

    Mono-molecular penetrating film frees rust-frozen parts. Lifts and replaces moisture with a protective film. Lubricates without affecting performance of electrical equipment. Non-conductive because it has high dielectric strength and lubricates delicate electronic equipment.

    Penetrant Plus®
    Manufactured by: Slide

    No. 41812, Net Wt. 12 oz. (16 fl. oz.) aerosol | msds
    No. 41801B, 1-gallon | msds
    No. 41805B, 5-gallon | msds
    No. 41855B, 55-gallon | msds

    Shop Slide Penetrant Plus®
    Purchase Slide Penetrant Plus®

     


    Slide Dry Formula Antioxidants


     

    White Rhino Rust Preventive

    • No chlorinated solvents
    • The Stripper®
    • Use to unclog mold vents
    • Removes resin build-up from polyacetals, PVC, urethanes & flame-retardant mold deposits
    • Removes most color deposits

    Slide White Rhino Rust Preventive wraps your mold in a tough, protective second skin. Comprised of foodapproved active ingredients, it’s ideal for plastics processing applications. Fast-drying formulation sets up quickly to protect immediately against moisture & light acids. Self-cleaning in startup.

    White Rhino Rust Preventive
    Manufactured by: Slide

    No. 46710, Net Wt. 10 oz. | msds
    No. 46705B, 5-gallon | msds
    No. 46755B, 55-gallon | msds

    Shop Slide White Rhino Rust PreventivePurchase Slide White Rhino Rust Preventive

     

     



    Mold Shield®

    • No chlorinated solvents
    • 2-year protection*
    • Non-penetrating
    • Will NOT bleed out & mark parts
    • Neutralizes fingerprints
    • Non-silicone, non-wax formulation
    • Self-cleaning in start-up
    • New ultra-dry formula
    • Seals out condensation

    Mold Shield has a unique, extra-dry spray package, which delivers a dry, non-penetrating mist into moving mold parts, including ejector pin holes, slides, cams, etc. This special dry mist prevents marking of plastic parts when molds are put back in service.
    *Protects up to 2 years under normal indoor storage conditions.

    Mold Shield®
    Manufactured by: Slide

    No. 42910, Net Wt. 10 oz. | msds
    No. 42905HB, cylinder | msds
    No. 42905HB, 5-gallon | msds
    No. 42955HB, 55-gallon | msds

    shop Slide Mold Shield®
    Purchase Slide Mold Shield®

     



    Quick Rust Preventive with Red Dye Indicator

    • No chlorinated solvents
    • Ultra-dry formula
    • 2-year protection*
    • Non-penetrating
    • Will not bleed out & mark parts
    • Neutralizes fingerprints
    • Non-silicone, non-wax formulation
    • Self-cleaning in start-up

    Slide Quick RP employs a combination of fast evaporating solvents & oils to set up quickly on your mold surfaces, providing immediate protection against moisture & light acids. This unique “dry” package makes clean-up quick & easy when the mold is put back into production, saving time & money.
    *Protects up to 2 years under normal indoor storage conditions.

    Quick Rust Preventive with Red Dye Indicator
    Manufactured by: Slide

    No. 42810, Net Wt. 10 oz. | msds
    No. 42805HB, 5-gallon | msds
    No. 42855HB, 55-gallon | msds

    Shop Slide Quick Rust Preventive with Red Dye Indicator
    Purchase Slide Quick Rust Preventive with Red Dye Indicator

     


     

    Spray Kits for Mold Release Agents

    Spray Kits & Accessories

    FREEDOM “Hands Free” Automatic Spray Unit, "Air-O-Spray" Portable Compressed Air Sprayer, "Charge-It" Refillable Stainless Steel Sprayer, Hand Pump Sprayers & Bottles.