Lubricants & Cutting Oils
What Lubricants Should I Use?
Don't buy lubricants only to find that they can't be used in your facility due to plant restrictions based upon disposal, health and safety issues. Corporate environmental policies and government regulations, as well as process requirements are considerations that should be addressed prior to buying cutting oils, greases and other lubricants. It is wise to
REQUEST FREE SAMPLES and the material safety data sheets to help with the selection process. Getting it right will ensure product and process compatibility and avoid costly downstream issues. Slide cutting oils, lubricants and greases perform effectively well in an environmentally safe manner.
What Cutting Oil Will Not Cause Metals to Cling?
Some cutting oils will cause metal chips to stick to the tapping tool. Slide Tap*It 40412 Tapping Oil is low viscosity oil especially formulated to effectivley lubricate and cool thread tapping tools thereby extending tool life and improved threading results. Slide 41314 cutting oil helps cool the metal cutting process while lubricating at the same time. The aerosol cans are great for hand tapping and light metal cutting but for machines with pump spraying systems, Slide offers non-aerosol bulk cutting oil and tapping oil in 1-gallon, 5-gallon and 55-gallon drums.
Slide 41314 Cutting Oil
Cutting Oil is general-purpose oil formulated to provide faster, easier drilling, cutting, sawing, threading, tapping and general machining. Compounded oil clings to metal and follows tool down. Pressurized spray forces cutting oil into hard-to-lubricate areas.
- Does Not contain chlorinated solvents
- Formulated with high pressure additives
- Designed for industrial use
Slide 41314
Aerosol can 14/oz Net weight, Material Safety Data Sheets | msds
Slide 41301B
1-gallon bucket, Material Safety Data Sheets | msds
Slide 41305B
5-gallon bucket, Material Safety Data Sheets | msds
Slide 41355B
55-gallon drum, Material Safety Data Sheets | msds
Buy Slide Cutting Oil
Slide 40412 Tap*It®
Slide 40412 Tap*It® is a combination of fluids made with natural oils free of chlorine. This specialty formula is designed for reaming, dressing abrasive wheels and producing higher quality tapped threads. Effective for titanium, aluminum, alloys, beryllium-copper, brass, bronze, chrome, magnesium, moly, stainless steel & stellite.
- No chlorinated solvents
- Produces cleaner threads
- For reaming, dressing abrasive wheels
Slide 40412
Aerosol can 12/oz. Net Weight, Material Safety Data Sheets | msds
Slide 40401B
1-gallon bucket, Material Safety Data Sheets | msds
Slide 40405B
5-gallon bucket, Material Safety Data Sheets | msds
Slide 40455B
55-gallon drum, Material Safety Data Sheets | msds
Buy Slide 40412 Tap*It®
Slide 41812 Penetrant Plus
Slide chose to name their anticorrosion lubricant "Penetrant Plus" because of its inherent property to penetrate rust frozen parts. The "Plus" is because this penetrating oil displaces and replaces moisture with a fine film to prevent oxidation. The protective film is dust free, non-greasy and non-sticking. Slide Penetrant Plus works great to clean and dry out electrical equipment. Try it and compare it against WD-40 and see the value of its monomolecular PTFE formula.
- No chlorinated solvents
- No silicone
- Will not harm rubber, paint nor most plastics
- Non-conductive high dielectric strength
Slide 41812
Aerosol can 12/oz.Net Weight 16-Fluid Ounces, Material Safety Data Sheets | msds
Slide 41801B
1-gallon bucket, Material Safety Data Sheets | msds
Slide 41805B
5-gallon bucket, Material Safety Data Sheets | msds
Slide 41855B
55-gallon drum, Material Safety Data Sheets | msds
Buy Slide Penetrant Plus
Slide 46010 Pin Lube & Grease
Econo-Spray® Pin Lube & Grease is an NLGI Grade 2 grease. Formulated with white lithium it is an ideal lubricant for ejector pins on molds, stripper plates and moving parts such as guides and slides. Many maintenance personnel use it prior to storing molds because of its resistance to moisture which works well against corrosion. Maximum operating temperature is 204°c(400°F).
- No chlorinated solvents
- Reduces friction prevents premature wear
- Not harmful to glass, rubber and most plastics
- Antioxidant inhibits the formation of rust
Slide 46010
Aerosol can 10/oz.Net Weight, Material Safety Data Sheets | msds
Slide 46000-7
7-lb. can, Material Safety Data Sheets | msds
Slide 46000-35
35-lb. bucket, Material Safety Data Sheets | msds
Slide 46000-400
400-lb. drum, Material Safety Data Sheets | msds
Buy Slide Econo-Spray® Pin Lube & Grease
Slide 42112N Silicone Spray Lube
Slide Silicone Spray Lube is rated by the public health and safety organization NSF (an independent, accredited organization that develops standards and tests to certify products and systems). The silicone based formula is approved for use on food processing equipment. Use it on food conveyor equipment, oven hinges, canning equipment and food sealing equipment. Maximum operating temperature is 315°c(600°F).
- No chlorinated solvents
- Helps eliminate sticky food buildup
- Works well in high temperatures
- Ideal for use during equipment process
Slide 42112N
Aerosol can 12/oz. Net Weight, Material Safety Data Sheets | msds
Buy Slide Silicone Spray Lube
Slide 54912 Heavy Duty Pin Lube
Slide Heavy Duty Pin Lube is an almost dry lubricant that makes it ideal for lubricating the forward position ejector pins on molds because it reduces the possibility of contaminating the molded parts. It will not interfere with painting of parts and can be used on certain food processing applications. Formulated as both a heavy duty lubricant and mold release agent it can replace having to purchase two different products. Maximum operating temperature is 232°c (450°F).
- No chlorinated solvents
- Non-silicone paintable formula
- Good with plastics, rubber, glass-filled nylon
- Meets or exceeds FDA food approval requirements
Slide 54912
Aerosol can 11.5/oz. Net Weight, Material Safety Data Sheets | msds
Buy Slide Heavy-Duty Mold Release and Pin Lube
Slide 43900 Super Grease
Slide Super Grease 43900 is rated as H1 by the public health and safety organization NSF. This means that super grease may be used as a lubricant on equipment in which there is a potential exposure of the lubricated part to edible products. Food processing equipment can be in one of the harshest environments due to required wash downs and high temperatures both of which can be detrimental to the effectiveness of the lubricants ability to maintain its integrity. Super Grease repels water and prevents corrosion while maintaining mechanical stability for temperatures ranging from -42°c to +343°c (-45°F to +650°F).
- No chlorinated solvents
- No silicone
- Excellent dielectric strength
- Excellent lubricant for all moving parts
Slide 43900-01
10-gram tube, Material Safety Data Sheets | msds
Slide 43900-03
3-oz. tube, Material Safety Data Sheets | msds
Slide 43900T
14-oz. cartridge tube, Material Safety Data Sheets | msds
Slide 43900-7
7-lb. can, Material Safety Data Sheets | msds
Slide 43900-35
35-lb. bucket, Material Safety Data Sheets | msds
Slide 43900-400
400-lb. drum, Material Safety Data Sheets | msds
Buy Slide Super Grease 43900
Slide 43911 Super Grease
Slide Super Grease in aerosol formula is clear, clean and non-yellowing. The aerosol super grease allows for easier application of hard to reach moving components like ball and roller bearings. Super Grease is ideal for use on injection molds, mold assembly components, and especially medical and food grade plastic parts. This is a good all around grease very stable during sudden temperature changes and harsh environments. Operating temperature ranges from -42°c to +343°c (-45°F to +650°F).
- No chlorinated solvents
- No silicone
- Excellent dielectric strength
- Excellent lubricant for all moving parts
Slide 43911
Arerosol can 11/oz. Net Weight, Material Safety Data Sheets | msds
Buy Slide Super Grease 43911
Spray Kits & Accessories
FREEDOM “Hands Free” Automatic Spray Unit, "Air-O-Spray" Portable Compressed Air Sprayer, "Charge-It" Refillable Stainless Steel Sprayer, Hand Pump Sprayers & Bottles.
