Payment & Delivery
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Burst-Firing (Zero Cross Fire) Turns Power ON and OFF During The AC Cycle At Zero Potential. This Type Of Relay Should Be Protected With Semiconductor Fuses. On A High Fault Short These Type Of Fuses Open In Tenths Of a Millisecond . The Fuse Should Be Sized 125% Of The Current Load Of The Relay. The I²T Rating Of The Fuse Must Be Below The Maximum I²T Rating Of The Relay.
NOTE: (I²T) Rated Current Squared Multiplied by Time (Seconds)
IDEC RSSAN-25A part number
Reference: KS-100
Clear Polycarbonate Protective Cover Fits Hockey Puck Style Solid State Relays Made Simple To Install
Reference: RPC-5386-0000
Brand: Watlow Electric Mfg.
Designed For DC Controled SSRs 10A ~ 40A Mounts Directly On SSR Control Terminals Monitors SSR Control Voltage And Load Output Load Output Thru SSR With No Control Signal Activates Alarm Alarm Is A Triac Rated 300mA@120~240Vac Alarm Can Be Wired To Audio/Visual Device
Reference: Z100-0815-000B
Brand: Watlow Electric Mfg.
Aluminum Body With A Black Anodized Finish Rated At 1.1°C/W Designed For Use With Hockey Puck Style Solid State Relays Width 3.2"(81mm) x 3.7"(94mm) Long x 2.9"(74mm) High Din Rail Mounted OR Base Mounted Relay Mounting Holes Are 8/32 Threads Removes Heat Away From Solid State Relays
Reference: 0830-0574-0000
Brand: Watlow Electric Mfg.
Hockey puck style SSR thermal transfer pads are highly recommended for proper relay installations.
