- There are no more items in your cart
- Shipping
- Total $0.00
Resources
-
Payment & Delivery
BLR714L3C4 screw plug immersion heater
- Comes wired 240v 3-phase delta in an explosion proof wiring enclosure
- It has (3) 316-ss passivated 14.625-inch immersed length heating elements
- with epoxy resin end seals rated at 194ºF and provide up to 6kw
- Also included is an integral thermowell for a sensor (sensor not included)
- and a 30A DPST thermostat control from 30ºF up to 110ºF with a 12º differential
- The heater has no heat the first 2.1875-inches from the 2-1/2-inch NPT screw plug
- and has an approximate shipping weight of 13/Lbs.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
2-1/2"NPT screw plug immersion heater | BLR714L3C4
Applications that require heating Deionized/Demineralized water
- Steam boilers and cooling systems
- Car washes
- Cleaning processes
- Electronics manufacturing
- Manufacturing lead-acid batteries
- Manufacturing cosmetics and personal care products
- Medical and pharmaceutical manufacturing
Features & Benefits of the Watlow® immersion heater
The integral thermowell provides a convenient method for temperature sensor insertion and allowing a replacement without draining the fluid being heated. The WATROD™ hairpin bend is re-compacted to maintain the mineral insulation density and maintain the dielectric strength and heat transfer efficiency. The heating element has a bright annealing passivation for corrosion resistance.
NOTE: A NEMA-7 enclosure designated for locations classified as Class-1, Division-1, Groups A,B,C, or D as defined in NFPA 70 is installed on this heater; however, is NOT CERTIFIED as installed on the heater. To obtain CSA certification as explosion proof Class-1, Groups B,C,D as installed on the heater, the end user must provide Watlow® the following intended process conditions: operating temperature, operating pressure, media type being heated, including the installation orientation of the heater (horizontal or vertical).
One conduit hub is supplied as per drawing.
Product Details
BLR714L3C4
2 Items
Data sheet
- Enclosure
- Nema 7 & 4 hazardous & wet proof
- Thermostat
- 30° ~ 110°F range with up to 12° differential
- Line power
- 240v AC 3-phase delta
- Wattage
- 6000 watt
- Mounting
- 2-1/2" NPT screw plug
- Immersion Length
- 14.625"
- Weight
- 12-lbs
- Comes wired 240v 3-phase delta in an explosion proof wiring enclosure
- It has (3) 316-ss passivated 14.625-inch immersed length heating elements
- with epoxy resin end seals rated at 194ºF and provide up to 6kw
- Also included is an integral thermowell for a sensor (sensor not included)
- and a 30A DPST thermostat control from 30ºF up to 110ºF with a 12º differential
- The heater has no heat the first 2.1875-inches from the 2-1/2-inch NPT screw plug
- and has an approximate shipping weight of 13/Lbs.