PM3L1CJ-AAAABAA 1/32-DIN 2-Outputs

Name: PM3L1CJ-AAAABAA 1/32-DIN 2-Outputs
Brand: Watlow Electric Mfg.
SKU: PM3L1CJ-AAAABAA
Price: 392 USD
Availability: InStock

Reference PM3L1CJ-AAAABAA

Brand Watlow Electric Mfg.

One Universal Input
Output #1 (C) - Switched DC/Open Collector
Output #2 (J) - Mechanical Relay 5A, Form A
Operating Voltage 100 ~ 240VAC
Dual Line Red Over Green 7 Segment Displays
Micro Processor Based
High/Low Process Limit Controller with Easy Set-Up Basic Menu

$392.00

Tax included

Quantity

In Stock

Security policy

(edit with the Customer Reassurance module)

Delivery policy

(edit with the Customer Reassurance module)

Return policy

(edit with the Customer Reassurance module)

Description

WATLOW EZ-ZONE® PM3L1CJ-AAAABAA

This unit can control a compressor, motor, pressure, valve, humidity, as well as thermal processes.
The serial communications when used with the free WATLOW software, saves time of controller setup.
Made In The USA

Universal Input

This can be a thermocouple grounded or ungrounded
It can be an RTD 2-wire or 3-wire
It can be 0-20mA or 0-50mV

Universal Process Output

The universal process is range selectable between 0-10VDC or 4-20mA.

Switched DC Specifications:

30mA DC Maximum Supply Current
Short Circuit Limited to < 50mA
22 ~ 32V -DC Open Circuit Voltage
Drives External Relay Using dc- and dc+

Open Collector Specifications:

Current Sinking Output @ 100mA Maximum
Maximum Supply Voltage -30VDC
For DC Loads An External Power Supply Is Required
Connect Load Negative To Open Collector

Electro-Mechanical Relay Form A Specifications:

Maximum Resistive Load 5A at 240VAC or 30VDC
20mA at 24V Minimum Load
Rated For Pilot Duty 125VA at 120/240VAC and 25VA at 24VAC
Single Pole Single Throw Normally Open Contact
100,000 Cycles at Rated Load
Output Does Not Supply Power
For use on AC or DC Loads

NOTE: Switching Pilot Duty Devices Such As Control Coils For Relays Or Contactors Produces An Electro-Magnetic Force When De-Energizing Those Type Of Loads. To Protect The Controller's Electronic Circuitry From The Inductive User Load, The Use Of An RC Suppressor Also Known As A Snubber Device Should Be Wired Between The Load And The Load Output Terminal Of The Controller. An Exception Is The Use Of Watlow Solid State Relays Having Internal RC Suppression.

Two Wire Bus Communication Interface Type EIA-485 Also Known As RS-485 Comes Standard With All PM Series Controllers Which Can Provide An Easy Alternative to Setting Up Program Menu Options. Various Profiles Can Be Configured And Saved As Files And Can Be Up Loaded To Other PM Controllers. USB To Serial Converter Is Required To Connect The PM Controller To Any Computer With A USB Port.

Review the above tabs for Data Sheets, FAQ's & Attachments for more specifics and operator's manual.

Product Details