SCR Contactors



    DC30-60K3-0000 Watlow Din-A-Mite C



    • Line Voltage 277~600Vac 3-Phase, 3-Leg control
    • Control Voltage 200~240Vac
    • Back to Back SCR Design
    • Zero Cross Switching Up-To 35A@104°F (see table below)
    • 200Ka Short Circuit Current Rating with proper fusing
    • Available with Shorted SCR Alarm, Watlow DC30-60K3-S000

    More details


    Shipping Rates

    1 Item Available

    • Din-A-Mite C Current De-Ratings Shown Are Based On Natural Convection

         176°F....16-Amp   158°F....21-Amp   140°F....25-Amp   122°F....30-Amp   104°F....35-Amp   86°F......40-Amp

      Din-A-Mite C  Operator Interface

      • Control input and indication light
      • Alarm output and indication light
      • Current limit indication LED


      Din-A-Mite C  Operating Environment

      • 0 to 90% non-condensing relative humidity
      • Storage temperature: -40°F to 185°F(-40°c to 85°c)
      • Operating temperature: -29°F to 176°F(-34°c to 80°c)
      • Insulation tested to 3,000 meters


      Din-A-Mite C  Terminals

      • Control input terminals: compression 24 to 16 AWG max torque 4.4 in/lb
      • Line & Load terminals: compression 14 to 4 AWG max torque 24 in/lb


      Din-A-Mite C  Mounting

      • DIN-Rail 35mm X 7.5mm DIN EN 50022
      • Back-Panel four mounting holes #6 to #8 fastener size
      • Through-Wall


      Din-A-Mite C  Agency Approvals

      • CE with proper filter: 204/108/EC electromagnetic compatibility directive EN 61326-1: industrial immunity Class A emissions not suitable for Class B environments, 2006/95/EC low voltage directive EN50178 safety requirements installation category III, pollution degree 2.
      • UL-50 type 4x enclosure, Class 1, Div.2 per ANSI/ISA 12.12.01, through wall heat sink models T4 file 184390
      • UL-508 listed and C-UL file E73741
      • Shock and vibration tested to IEC 60068-2-32
      • Vibration tested to IEC 60068-2-6