- There are no more items in your cart
- Shipping
- Total $0.00
Resources
DC20-24K2-S000 Watlow Din-A-Mite C
- Line Voltage 100~240Vac 3-Phase, 2-Leg control
- Control Voltage 100~120Vac
- Back to Back SCR Design
- Zero Cross Switching Up-To 45A@104°F (see table below)
- 200Ka Short Circuit Current Rating with proper fusing
- With Shorted SCR Alarm Protection
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
Din-A-Mite C Current De-Ratings Shown Are Based On Natural Convection
176°F....25-Amp | 158°F....30-Amp | 140°F....35-Amp | 122°F....40-Amp | 104°F....45-Amp | 86°F......50-Amp |
Din-A-Mite C Operator Interface
- Control input and indication light
- Alarm output and indication light
- Current limit indication LED
Din-A-Mite C Operating Environment
- 0 to 90% non-condensing relative humidity
- Storage temperature: -40°F to 185°F(-40°c to 85°c)
- Operating temperature: -29°F to 176°F(-34°c to 80°c)
- Insulation tested to 3,000 meters
Din-A-Mite C Terminals
- Control input terminals: compression 24 to 16 AWG max torque 4.4 in/lb
- Line & Load terminals: compression 14 to 4 AWG max torque 24 in/lb
Din-A-Mite C Mounting
- DIN-Rail 35mm X 7.5mm DIN EN 50022
- Back-Panel four mounting holes #6 to #8 fastener size
- Through-Wall
Din-A-Mite C Agency Approvals
- CE with proper filter: 204/108/EC electromagnetic compatibility directive EN 61326-1: industrial immunity Class A emissions not suitable for Class B environments, 2006/95/EC low voltage directive EN50178 safety requirements installation category III, pollution degree 2.
- UL-50 type 4x enclosure, Class 1, Div.2 per ANSI/ISA 12.12.01, through wall heat sink models T4 file 184390
- UL-508 listed and C-UL file E73741
- Shock and vibration tested to IEC 60068-2-32
- Vibration tested to IEC 60068-2-6