Solid State Relays

Reference: SSR-240-10A-DC1

Brand: Watlow Electric Mfg.

10A SPST N/O 240Vac Power 3~32Vdc Control

Zero cross fire Back to back SCR design Maximum I²T fusing is 60A²seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Includes thermal foil, washers, and screws for mounting to a heat sink Equal to Crydom D2410 and Potter & Brumfield SSRT-240D10        

Reference: RPC-5399-42-000

Brand: Watlow Electric Mfg.

Fast Cycle Input Card

Designed For Zero Cross Type Solid State Relays With DC Control Mounts Directly On The Relay Control Terminals Operates From A Standard Instrumentation Signal Of 4 ~ 20mA Utilizes A Time Proportional Cycle Rate Of Less Than One Second 4V-AC Cycles On And 4V-AC Cycles Off At 50 Percent Power Allows Using High Watt Density Heaters With Fast Cycling

Reference: SSR-240-10A-AC1

Brand: Watlow Electric Mfg.

10A SPST N/O 240Vac Power 90~280Vac Control

Zero cross fire Back to back SCR design Maximum I²T fusing is 60A² seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Equal to Crydom A2410 and Potter & Brumfield SSRT-240A10

Reference: 0804-0147-0000

Brand: ITW PAKTRON

100-Ohm 250Vac 600Vdc Snubber

Capacitance 0.1 uF Capacitance Tolerance +/- 20% 1/2 Watt Resistor Tolerance +/- 10% Operating Ambient Temperature -67°F ~ 185°F Lead Spacing 20.8mm Constructed of Metallized Polyester In Series With A Carbon Composition Resistor

Reference: SSR-240-25A-DC1

Brand: Watlow Electric Mfg.

25A SPST N/O 240Vac Power 3~32Vdc Control

Zero cross fire Back to back SCR design Maximum I²T fusing is 260A²seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.05°F C/W Internal voltage snubber Includes thermal foil, washers, and screws for mounting to a heat sink Equal to Crydom D2425 and Potter & Brumfield SSRT-240D25      

Reference: KS-100

IP20 SSR Relay Cover

Clear Polycarbonate Protective Cover Fits Hockey Puck Style Solid State Relays Made Simple To Install  

Reference: SSR-240-25A-AC1

Brand: Watlow Electric Mfg.

25A SPST N/O 240Vac Power 90~280Vac Control

Zero Cross Fire Back to Back SCR Design Hocky Puck Style Maximum I²T Fusing is 260A² Seconds Line Voltage 24~240Vac Ambient Operating Temperature -40°F ~ 176°F Thermal Resistance 1.05°F C/W Internal Voltage Snubber Equal to Crydom A2425 and Potter & Brumfield SSRT-240A25

Reference: SSRT-240D25

Brand: Potter & Brumfield

25A SPST N/O 240Vac Power 3~32Vdc Control

Zero Cross Fire Back to Back SCR Design Hocky Puck Style 1.75"w X 2.25"L X 0.87"H Maximum I²T Fusing Is 937A²Seconds Line Voltage Max. 280Vac Ambient Operating Temperature -40°F ~ 176°F Thermal Resistance 1.7°F C/W Snubberless Traic Output Single Pole Double Throw    

Reference: 0830-0574-0000

Brand: Watlow Electric Mfg.

SSR Thermal Transfer Pad

Hockey puck style SSR thermal transfer pads are highly recommended for proper relay installations.  

Reference: SSR-25DA

Brand: Ruike Electronic Industrial Co., LTD

25A SPST N/O 480Vac Power 3~32Vdc Control

Zero Cross Fire Back to Back SCR Design Hocky Puck Style Maximum I²T Fusing Is 960A²Seconds Line Voltage 24 ~ 480Vac Ambient Operating Temperature -40°F ~ 176°F Thermal Resistance 0.63°F C/W

Reference: Z100-0815-000A

Brand: Watlow Electric Mfg.

Z100-0815-000A 18A Heat Sink

Aluminum Body With A Black Anodized Finish Rated At 2.2°C/W Designed For Use With Hockey Puck Style Solid State Relays Width 1.8"(46mm) x 3.7"(94mm) Long x 1.9"(48mm) High Din Rail Mounted OR Base Mounted Relay Mounting Holes Are 8/32 Threads Removes Heat Away From Solid State Relays

Reference: RSSAN-25A

Brand: IDEC

25A SPST N/O 600Vac Power 90~280Vac Control

Zero Cross Fire Back to Back SCR Design Control Voltage 90 ~ 280Vac Pick Up Voltage 90Vac Drop Out Voltage 10Vac Line Voltage 48 ~ 650Vac Snubbed For 0.5 Power Factor At Rated Load Ambient Operating Temperature -40°F ~ 176°F Thermal Resistance 1.5°C/W LED Indicator