Relay Accessories

Reference: RPC-5399-42-000

Brand: Watlow Electric Mfg.

Fast Cycle Input Card

Designed For Zero Cross Type Solid State Relays With DC Control Mounts Directly On The Relay Control Terminals Operates From A Standard Instrumentation Signal Of 4 ~ 20mA Utilizes A Time Proportional Cycle Rate Of Less Than One Second 4V-AC Cycles On And 4V-AC Cycles Off At 50 Percent Power Allows Using High Watt Density Heaters With Fast Cycling

Reference: 0804-0147-0000

Brand: ITW PAKTRON

100-Ohm 250Vac 600Vdc Snubber

Capacitance 0.1 uF Capacitance Tolerance +/- 20% 1/2 Watt Resistor Tolerance +/- 10% Operating Ambient Temperature -67°F ~ 185°F Lead Spacing 20.8mm Constructed of Metallized Polyester In Series With A Carbon Composition Resistor

Reference: KS-100

IP20 SSR Relay Cover

Clear Polycarbonate Protective Cover Fits Hockey Puck Style Solid State Relays Made Simple To Install  

Reference: 0830-0574-0000

Brand: Watlow Electric Mfg.

SSR Thermal Transfer Pad

Hockey puck style SSR thermal transfer pads are highly recommended for proper relay installations.  

Reference: Z100-0815-000A

Brand: Watlow Electric Mfg.

Z100-0815-000A 18A Heat Sink

Aluminum Body With A Black Anodized Finish Rated At 2.2°C/W Designed For Use With Hockey Puck Style Solid State Relays Width 1.8"(46mm) x 3.7"(94mm) Long x 1.9"(48mm) High Din Rail Mounted OR Base Mounted Relay Mounting Holes Are 8/32 Threads Removes Heat Away From Solid State Relays

Reference: Z100-0815-000B

Brand: Watlow Electric Mfg.

Z100-0815-000B 35A Heat Sink

Aluminum Body With A Black Anodized Finish Rated At 1.1°C/W Designed For Use With Hockey Puck Style Solid State Relays Width 3.2"(81mm) x 3.7"(94mm) Long x 2.9"(74mm) High Din Rail Mounted OR Base Mounted Relay Mounting Holes Are 8/32 Threads Removes Heat Away From Solid State Relays

Reference: Z100-0815-000C

Brand: Watlow Electric Mfg.

Z100-0815-000C 55A Heat Sink

Aluminum Body With A Black Anodized Finish Rated At 0.6°C/W Designed For Use With Hockey Puck Style Solid State Relays Width 3.2"(81mm) x 5.89"(149.6mm) Long x 3.6"(91mm) High Din Rail Mounted OR Base Mounted Relay Mounting Holes Are 8/32 Threads Removes Heat Away From Solid State Relays