Payment & Delivery
Power Switching Devices Apply or Interrupt Electric Power To A Controlled Device. Basic Types Of Switching Devices Are Electro-Mechanical Contactors (Relays) That Switch Electric Power Through Physical Contacts, or Solid State Relays, And SCR Contactors That Switch Power Electronically, And Mercury Relays (Contactors) That Switch Power By Changing The Mercury Level In A Tube Reservoir With A Plunger Activated By A Solenoid Coil.
There are 165 products.
Reference: DA10-02C0-0000
Brand: Watlow Electric Mfg.
Line Voltage 24~48Vac 1-Phase Control Voltage 4.5~32Vdc Maximum control current draw is 8mA@4.5Vdc Din Rail Mount or Flat Panel Mounting Back to Back SCR Design Zero Cross Switching Up-To 25A@77°F 600Vac (see table below)
Reference: SSR-240-10A-DC1
Brand: Watlow Electric Mfg.
Zero cross fire Back to back SCR design Maximum I²T fusing is 60A²seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Includes thermal foil, washers, and screws for mounting to a heat sink Equal to Crydom D2410 and Potter & Brumfield SSRT-240D10
Reference: BF7046
Brand: Mercury Displacement Industries
Coil Rating 133mA 3.2Va 180-Ω Contacts Normally Open Rated 30A@600V Amperage Rating Based On Resistive Load Contact Make Time 50 Milliseconds Contact Break Time 80 Milliseconds Temperature Range -35°c To +85°c Dielectric Withstanding UpTo 2500Vac RMS Direct Replacement For Watlow HG30-6KD1-0000
Reference: DA10-02F0-0000
Brand: Watlow Electric Mfg.
Line Voltage 24~48Vac 1-Phase 4~20mA Proportional Control Din Rail Mount or Flat Panel Mounting Back to Back SCR Design Zero Cross Switching Up-To 25A@77°F (see table below)
Reference: GDP403L120V
Brand: Carlo Gavazzi
Carlo Gavazzi Definite Purpose Contactor Without Enclosure Rated 40A Inductive Load ~ 50A Resistive Load 600Vac 3-Pole with 120Vac Class C Insulated Coil Dual Quick Connect Tabs For Line & Load Connections Main Frame Incorporates High Arc Resistant Plastic 3-3/4" X 2-3/4" X 3" Made In China
Reference: SSR-240-10A-AC1
Brand: Watlow Electric Mfg.
Zero cross fire Back to back SCR design Maximum I²T fusing is 60A² seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Equal to Crydom A2410 and Potter & Brumfield SSRT-240A10
Reference: RPC-5386-0000
Brand: Watlow Electric Mfg.
Designed For DC Controled SSRs 10A ~ 40A Mounts Directly On SSR Control Terminals Monitors SSR Control Voltage And Load Output Load Output Thru SSR With No Control Signal Activates Alarm Alarm Is A Triac Rated 300mA@120~240Vac Alarm Can Be Wired To Audio/Visual Device
Reference: BF2-7032
Brand: Mercury Displacement Industries
Coil Rating 1488Ma 4.5Va 131-Ω Contacts Normally Open Rated 30A@600V Amperage Rating Based On Resistive Load Contact Make Time 50 Milliseconds Contact Break Time 80 Milliseconds Temperature Range -35°c To +85°c Dielectric Withstanding UpTo 2500Vac RMS Direct Replacement For Watlow HG30-6KD2-0000
Reference: DA10-02K1-0000
Brand: Watlow Electric Mfg.
Line Voltage 24~48Vac 1-Phase Control Voltage 22~26Vac Din Rail Mount or Flat Panel Mounting Back to Back SCR Design Zero Cross Switching Up-To 25A@77°F (see table below)
Reference: 0804-0147-0000
Brand: ITW PAKTRON
Capacitance 0.1 uF Capacitance Tolerance +/- 20% 1/2 Watt Resistor Tolerance +/- 10% Operating Ambient Temperature -67°F ~ 185°F Lead Spacing 20.8mm Constructed of Metallized Polyester In Series With A Carbon Composition Resistor
Reference: SSR-240-25A-DC1
Brand: Watlow Electric Mfg.
Zero cross fire Back to back SCR design Maximum I²T fusing is 260A²seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.05°F C/W Internal voltage snubber Includes thermal foil, washers, and screws for mounting to a heat sink Equal to Crydom D2425 and Potter & Brumfield SSRT-240D25
Reference: BF3-7038
Brand: Mercury Displacement Industries
Coil Rating 329Ma 7.9Va 73-Ω Contacts Normally Open Rated 30A@600V Amperage Rating Based On Resistive Load Contact Make Time 50 Milliseconds Contact Break Time 80 Milliseconds Temperature Range -35°c To +85°c Dielectric Withstanding UpTo 2500Vac RMS Direct Replacement For Watlow HG30-6KD3-0000
