Payment & Delivery
DC Power Supplies, Power Conditioners, Voltage Regulators, Surge Protectors, Battery Back-Ups
Subcategories
There are 190 products.
Reference: DA10-02C0-0000
Brand: Watlow Electric Mfg.
Line Voltage 24~48Vac 1-Phase Control Voltage 4.5~32Vdc Maximum control current draw is 8mA@4.5Vdc Din Rail Mount or Flat Panel Mounting Back to Back SCR Design Zero Cross Switching Up-To 25A@77°F 600Vac (see table below)
Reference: 631-1101-300
Brand: Jefferson Electric
Model 631-1101-300 Replaces 631-1101-000 Primary Voltages: 220/230/240V X 440/460/480V Secondary Voltages: 110/115/120V Secondary Fuse Clips Standard Primary Fuse Block Available Part Number 631-0000-301 Primary Fuse Cover Available Part Number 631-0000-302
Reference: 16-0246
Brand: Watlow Electric Mfg.
This Watlow current transformer can provide a Proportional 0~50mA signal from a 0~50A current passing thru the 16.5mm donut hole. The metered signal from the CT can be used to detect a shorted heater or SSR circuit by a temperature controller or power contactor. Dimensions are 0.65"ID Hole X 1.40"OD X 1.50"H X 0.50"D and comes with an adhesive pad and...
Reference: 0847-0299-0000
Brand: Watlow Electric Mfg.
Input Voltage Range 100 ~ 240Vac Output Voltage Can Be Adjusted From The Front Panel Adjustable Output Voltage Range 24 ~ 28Vdc Red & Green LED Indicators Provide Output Status Class II Insulation Requires No Earth Ground Operating Temperature -25° ~ +71°c Low Profile Din-Rail Mount 2.2" deep
Reference: SSR-240-10A-DC1
Brand: Watlow Electric Mfg.
Zero cross fire Back to back SCR design Maximum I²T fusing is 60A²seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Includes thermal foil, washers, and screws for mounting to a heat sink Equal to Crydom D2410 and Potter & Brumfield SSRT-240D10
Reference: BF7046
Brand: Mercury Displacement Industries
Coil Rating 133mA 3.2Va 180-Ω Contacts Normally Open Rated 30A@600V Amperage Rating Based On Resistive Load Contact Make Time 50 Milliseconds Contact Break Time 80 Milliseconds Temperature Range -35°c To +85°c Dielectric Withstanding UpTo 2500Vac RMS Direct Replacement For Watlow HG30-6KD1-0000
Reference: DA10-02F0-0000
Brand: Watlow Electric Mfg.
Line Voltage 24~48Vac 1-Phase 4~20mA Proportional Control Din Rail Mount or Flat Panel Mounting Back to Back SCR Design Zero Cross Switching Up-To 25A@77°F (see table below)
Reference: GDP403L120V
Brand: Carlo Gavazzi
Carlo Gavazzi Definite Purpose Contactor Without Enclosure Rated 40A Inductive Load ~ 50A Resistive Load 600Vac 3-Pole with 120Vac Class C Insulated Coil Dual Quick Connect Tabs For Line & Load Connections Main Frame Incorporates High Arc Resistant Plastic 3-3/4" X 2-3/4" X 3" Made In China
Reference: 631-1103-300
Brand: Jefferson Electric
Model 631-1103-300 Replaces 631-1103-000 Primary Voltages: 120/240V Secondary Voltages: 24Vac Secondary Fuse Clips Standard Primary Fuse Block Available Part Number 631-0000-301 Primary Fuse Cover Available Part Number 631-0000-302
Reference: MROCRIB 16-0246
Brand: Private Label
This Split Core Current Transformer Is Able To Produce a 0-20mA AC Signal From a 0-50A AC Primary Current. The Split Core Allows The Transformer To Be Installed Without Disconnecting The Primary Current Carrying Wire. Comes with 70"Leads
Reference: 0847-0300-0000
Brand: Watlow Electric Mfg.
Input Voltage Range 100 ~ 240Vac Output Voltage Can Be Adjusted From The Front Panel Adjustable Output Voltage Range 24 ~ 28Vdc Red & Green LED Indicators Provide Output Status Class II Insulation Requires No Earth Ground Operating Temperature -25° ~ +71°c Low Profile Din-Rail Mount 2.2" deep
Reference: SSR-240-10A-AC1
Brand: Watlow Electric Mfg.
Zero cross fire Back to back SCR design Maximum I²T fusing is 60A² seconds Line voltage 24~240Vac Ambient operating temperature -40°F to +176°F Thermal resistance 1.48°F C/W Internal voltage snubber Equal to Crydom A2410 and Potter & Brumfield SSRT-240A10
