1/8 DIN Horizontal



    PM9C1FJ-AAAAAAA 1/8-DIN 2-Outputs



    • Output#1 Selectable Process From 0~5Vdc or 4~20ma
    • Output#2 Mech-Relay SPST 5-Amp
    • One Universal Input
    • 100 ~ 240V-ac Auto-Tune PID Controller With Extensive Full Features Menu
    • Also Available In 24V-Ac 12~24V-Dc Model PM9C3FJ-AAAAAAA
    • Also Available In Vertical Panel Mount Model PM8C1FJ-AAAAAAA

    More details


    Shipping Rates

    6 Items Available

    • Selectable Analog Output Specifications:

      • Range Selectable Either Dc Voltage Or mA Current
      • 0 ~ 20mA ±30µA Into 800Ω Maximum Load With 5µA Resolution
      • 0 ~ 10Vdc ±15mV Into 1KΩ Minimum Load With 2.5mV Nominal Resolution
      • Scalable Output Supplies Power
      • Output May Be Used As Retransmit OrControl
      • Can Not Use Both Current & Voltage Outputs At Same Time

      Electro-Mechanical Relay Form A Specifications:

      • Maximum Resistive Load 5A at 240Vac Or 30Vdc
      • 20mA at 24V Minimum Load
      • Rated For Pilot Duty 125Va at 120/240Vac And 25Va at 24Vac
      • Single Pole Single Throw Normally Open Contact
      • 100,000 Cycles at Rated Load
      • Output Does Not Supply Power
      • For Use On AC Or DC Loads

      Two Wire Bus Communication Interface Type EIA-485 Also Known As RS-485 Comes Standared With All PM Series Controllers Which Can Provide An Easy Alternative to Setting Up Program Menu Options. Various Profiles Can Be Configured And Saved As Files And Can Be Up Loaded To Other PM Controllers. USB To Serial Converter Is Required To Connect The PM Controller To Any Computer With A USB Port.

      NOTE: Switching Pilot Duty Devices Such As Control Coils For Relays Or Contactors Produces An Electro-Magnetic Force When De-Engergizing Those Type Of Loads. To Protect The Controller's Electronic Circuitry From The Inductive User Load, The Use Of An RC Suppressor Also Known As A Snubber Device Should Be Wired Between The Load And The Load Output Terminal Of The Controller. An Exception Is The Use Of Watlow Solid State Relays Having Internal RC Suppression.

      Review The Data Sheet Tab For More Specifics Or Check Out The Operator's Manual From The Download Tab

      PROGRAM FEATURESAdvanced Auto-Tune PID Control Algorithm
      WARRANTY Three Years
      OTHER FEATURESIP2X Increases Safety For Installers And Operators
        What is the difference between model numbers ending in BAA and models ending in AAA?
        Both controllers have the same form, fit, and function in fact they are the same controller with the exception of the program menus. The PM controllers ending in BAA have a more user-friendly EXPRESS menu that is application-oriented for thermal control. The PM controllers ending in AAA have a more comprehensive menu that in addition to thermal control the programming of various other processes such as pressure, humidity, valve control and much more is included in the programing menu.