1/4 DIN



    PM4C1FA-AAAAAAA 1/4-DIN 1-Output



    • One Universal Input Provides Flexibility
    • Selectable Analog Output Either 0 ~ 10Vdc Or 0 ~ 20mA
    • Operating Voltage 85 ~ 264VAc
    • Auto-Tune PID Controller With Extensive Features Menu
    • Allows For Various Process Control
    • Available In 12 ~ 40Vdc Or 20 ~ 28Vac Model PM4C3FA-AAAAAAA

    More details


    Shipping Rates

    1 Item Available

    • Universal Process Output Specifications:

      • Range Selectable Either Vdc Voltage Or mA Current
      • 0 ~ 20mA ±30µA Into 800Ω Maximum Load With 5µA Resolution
      • 0 ~ 10Vdc ±15mV Into 1KΩ Minimum Load With 2.5mV Nominal Resolution
      • Scalable Output Supplies Power
      • Output May Be Used As Retransmit Or Control
      • Can Not Use Both Current & Voltage Outputs At Same Time

      Two Wire Bus Communication Interface Type EIA-485 Also Known As RS-485 Comes Standared With All PM Series Controllers Which Can Provide An Easy Alternative to Setting Up Program Menu Options. Various Profiles Can Be Configured And Saved As Files And Can Be Up Loaded To Other PM Controllers. USB To Serial Converter Is Required To Connect The PM Controller To Any Computer With A USB Port.

      Review The Data Sheet Tab For More Specifics Or Check Out The Operator's Manual From The Download Tab

      PROGRAM FEATURESAdvanced Auto-Tune PID Control Algorithm
      WARRANTY Three Years
      OTHER FEATURESIP2X Increases Safety For Installers And Operators
        What is the difference between model numbers ending in BAA and models ending in AAA?
        Both controllers have the same form, fit, and function in fact they are the same controller with the exception of the program menus. The PM controllers ending in BAA have a more user-friendly EXPRESS menu that is application-oriented for thermal control. The PM controllers ending in AAA have a more comprehensive menu that in addition to thermal control the programming of various other processes such as pressure, humidity, valve control and much more is included in the programing menu.