• Payment & Delivery

    Payment & Delivery
Watlow BLR710L1C immersion heater
  • Watlow BLR710L1C immersion heater
  • BLR710L1C  | conduit hub drawing

BLR710L1C screw plug immersion heater

BLR710L1C
  • Wired 120V 1-phase parallel in an explosion proof wiring enclosure
  • it has (3) 316-ss passivated 10.625-inch immersed length heating elements
  • with epoxy resin end seals rated at 194°F and a thermowell for sensor.
  • The heater has no heat the first 2.625 inches from the 2 1/2-inch NPT Screw Plug
  • and has an approximate shipping weight of 12/lbs.
$2,327.00
Tax included
Quantity
In Stock

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description

Screw Plug Immersion Heater | BLR710L1C

Application: Deionized/Demineralized Water

  • Steam boilers and cooling systems
  • Manufacturing lead-acid batteries
  • Car washes
  • Electronics manufacturing
  • Medical and Pharmaceutical manufacturing
  • Cleaning processes
  • Manufacturing Cosmetics and Personal Care Products

Features & Benefits of the Watlow® Immersion Heater

The integral thermowell provides a convenient method for temperature sensor insertion and allowing a replacement without draining the fluid being heated. The WATROD™ hairpin bend is re-compacted to maintain the mineral insulation density and maintain the dielectric strength and heat transfer efficiency. The heating element has a bright annealing passivation for corrosion resistance.

NOTE: A NEMA-7 enclosure designated for locations classified as Class-1, Division-1, Groups A,B,C, or D as defined in NFPA 70 is installed on this heater; however, is NOT CERTIFIED as installed on the heater. To obtain CSA certification as explosion proof Class-1, Groups B,C,D as installed on the heater, the end user must provide Watlow® the following intended process conditions: operating temperature, operating pressure, media type being heated, including the installation orientation of the heater (horizontal or vertical).

  • One conduit hub is supplied as per provided drawing above.

Review the above tabs for Data Sheets, FAQ's & Attachments; more specifics and manuals.

Product Details
BLR710L1C
1 Item

Data sheet

Enclosure
Nema 7 & 4 hazardous & wet proof
Thermostat
not included
Line power
120v AC 1-phase
Wattage
4500 watt
Mounting
2-1/2" NPT screw plug
Immersion Length
10.625"
Weight
10-lbs
Attachments
Download
Screw Plug Immersion Heaters

Application: Deionized Demineralized Water

Download (169.07KB)