• 10K Amp Interrupting Rating
  • Fast Acting On Short Circuits
  • Moderate Time-Delay On Inrush Currents
  • Also Available Up To 15Amps
  • Can Be Used With UltraSafe Fuse Holders
  • UPC 78200190123
  • ">

    SCR Contactors

    Resources

    Manufacturers

      DC30-24K2-0000 Watlow Din-A-Mite C

      DC30-24K2-0000

      New

      • Line Voltage 100~240Vac 3-Phase, 3-Leg control
      • Control Voltage 100~120Vac
      • Back to Back SCR Design
      • Zero Cross Switching Up-To 35A@104°F (see table below)
      • 200Ka Short Circuit Current Rating with proper fusing
      • Available with Shorted SCR Alarm, Watlow DC30-24K2-S000

      More details

      $380.00

      Shipping Rates

      1 Item Available

      • Din-A-Mite C Current De-Ratings Shown Are Based On Natural Convection

           176°F....16-Amp   158°F....21-Amp   140°F....25-Amp   122°F....30-Amp   104°F....35-Amp   86°F......40-Amp

        Din-A-Mite C  Operator Interface

        • Control input and indication light
        • Alarm output and indication light
        • Current limit indication LED

         

        Din-A-Mite C  Operating Environment

        • 0 to 90% non-condensing relative humidity
        • Storage temperature: -40°F to 185°F(-40°c to 85°c)
        • Operating temperature: -29°F to 176°F(-34°c to 80°c)
        • Insulation tested to 3,000 meters

         

        Din-A-Mite C  Terminals

        • Control input terminals: compression 24 to 16 AWG max torque 4.4 in/lb
        • Line & Load terminals: compression 14 to 4 AWG max torque 24 in/lb

         

        Din-A-Mite C  Mounting

        • DIN-Rail 35mm X 7.5mm DIN EN 50022
        • Back-Panel four mounting holes #6 to #8 fastener size
        • Through-Wall

         

        Din-A-Mite C  Agency Approvals

        • CE with proper filter: 204/108/EC electromagnetic compatibility directive EN 61326-1: industrial immunity Class A emissions not suitable for Class B environments, 2006/95/EC low voltage directive EN50178 safety requirements installation category III, pollution degree 2.
        • UL-50 type 4x enclosure, Class 1, Div.2 per ANSI/ISA 12.12.01, through wall heat sink models T4 file 184390
        • UL-508 listed and C-UL file E73741
        • Shock and vibration tested to IEC 60068-2-32
        • Vibration tested to IEC 60068-2-6