Online products

Resources

Manufacturers

    List of products by manufacturer Slide

    Slide Produces Mold Care Products Used In The Plastics Injection Molding Process.  Mold Cleaners And Degreasers, Mold Release Agents, Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.

    Slide Produces Mold Care Products Used In The Plastics Injection Molding Process.  Mold Cleaners And Degreasers Are Formulated Without The Use Of Chlorinated Solvents.  Mold Release Agents Are Formulated For Various Molding Requirements. Slide Formulates Rust Preventives For Protecting Molds As Well As Purging Compounds To Clean Out Injection Barrels.

    More
    per page
    • Econo-Spray® Pin Lube & Grease
      $58.22
      Econo-Spray® Pin Lube & Grease

      Econo-Spray® Pin Lube & Grease Is A White Lithium Grease That Protects Equipment By Reducing The Friction And Sticking That Can Cause Premature Wear And Hinder Productivity. Pin Lube & Grease Is Ideal For Knock-Out Pins Where Part Marking Could Be A Problem. A Heavy-Duty Grease, It Is Water Resistant, Protects Against Corrosion And Works...

      $58.22
      $58.22 In Stock
    • Light-Duty Mold Release_cyl
      $66.28
      Slide 40012N Paintable Light Duty Mold Release

      Slide 40012N economical paintable mold release requires no special cleaning. It will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating operations. You get perfect finishes every time & more cycles per can over other comparable releases.

      $66.28
      $66.28 In Stock
    • Silicone Mold Release55
      $98.55
      Slide 40112N Silicone Heavy Duty Mold Release

      Slide 40112N Silicone Heavy Duty Mold Release gets more cycles per spray with more cycles per can. With Slide’s silicone high-quality, Pure Silicone-Oil Mold Release. Keeps the most challenging parts from hanging up & stalling production. Extremely effective for Injection & Compression Molding.

      $98.55
      $98.55 In Stock
    • No-Rust® Rust Preventative and Inhibitor55
      $64.01
      Slide 40212 No-Rust® Rust Preventative & Inhibitor

      Slide 40212 No-Rust is a positive one-step rust preventive that contains both neutralizer and rust inhibitor. It protects up to five years under normal indoor storage conditions by displacing moisture from metal surfaces and adhering tightly. Ideal for mold and die protection, stripper plates, jigs and fixtures, precision instruments, machine tools and...

      $64.01
      $64.01 In Stock
    • Tap-It Tapping Oil 55
      $94.52
      Slide 40412 Tap-It® Tapping Oil

      Slide 40412 Tap-It® is a combination of fluids made with natural oils free of chlorine. This specialty formula is designed for reaming, dressing abrasive wheels and producing higher quality tapped threads. Effective for titanium, aluminum, alloys, berylliumcopper, brass, bronze, chrome, magnesium, moly, stainless steel & stellite.

      $94.52
      $94.52 In Stock
    • Econo-Spray® 1 Mold Release Agent5
      $51.41
      Slide 40510 Econo-Spray® No.1 Mold Release

      Slide 40510 Econo-Spray® No.1 mold release contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics. Maximum operating temperature 315°c (600°F)

      $51.41
      $51.41 In Stock
    • EpoxEase® Mold Release
      $70.28
      Slide 40614 EpoxEase® Mold Release

      Slide 40614 is a synthetic wax-based, non-silicone mold release. It is formulated to prevent the sticking commonly seen when using all-purpose release agents on epoxies, maximizing your productivity.

      $70.28
      $70.28 In Stock
    • Econo-Spray® 2 Mold Release
      $53.29
      Slide 40710 Econo-Spray® No. 2 Mold Release

      Slide 40710 Econo-Spray® 2 is a mold release agent is paintable in a non-chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning. Maximum operating temperature 343°c (650°F).

      $53.29
      $53.29 In Stock
    • Econo-Spray® 3 Mold Release5
      $52.84
      Slide 40810 Econo-Spray® No.3 Mold Release

      Slide 40810 Econo-Spray® 3 Mold Release contains a highly effective non-silicone release in a non-chlorinated solvent carrier system. This product is highly paintable, and will permit ultra-sonic welding of molded parts. It affords excellent release of all thermoplastics.  

      $52.84
      $52.84 In Stock
    • Quick Mold Cleaner
      $54.04
      Slide 40910H Quick Mold Cleaner

      Slide 40910H Quick Mold Cleaner effectively cleans molds at room temperature without wiping. It removes silicones, grease, oil and wax build-up on mold surfaces, etc. It leaves no residue. Its fast evaporating formulation helps maximize the productivity of your operation.

      $54.04
      $54.04 In Stock
    • Zinc Stearate Mold Release
      $66.60
      Slide 41012N Zinc Stearate Mold Release

      Slide 41012N is a dry, light, water-repellent powder, zinc stearate is economical to use and gives better finishes. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs.

      $66.60
      $66.60 In Stock
    • DFL - Dry Film Lube (Fluorocarbon) Mold Release
      $118.10
      Slide 4112N DFL Dry Film Lube (Fluorocarbon) Mold Release

      Slide 41112N Dry Film Lube (Fluorocarbon) Mold Release is an excellent, fast-drying lubricant for injection molding where clarity and deep draw are important, especially with hard, brittle resins. DFL® will not create “hydraulic effect” on deep drafted molds. Its “dry” formulation will not pick up dust or dirt and remains inert when exposed to corrosive...

      $118.10
      $118.10 In Stock
    • Water Soluble Mold Release
      $101.80
      Slide 41212N Water Soluble Mold Release

      Slide 41212N Water Soluble Release permits complete cleaning of molded parts. In most cases this release need not be removed prior to painting, hot-stamping or plating; testing is recommended. Antistatic properties reduce dirt pick-up on molded parts.

      $101.80
      $101.80 In Stock
    • Cutting Oil 55
      $57.33
      Slide 41314 Cutting Oil

      Slide's Cutting Oil is a compounded oil formulated to work with all metals to provide faster, easier drilling, cutting, sawing, threading, tapping and general machining. High pressure additives hold the oil in place by causing it to cling to the metal surfaces and thereby eliminates waste caused by running and dripping off the work area. Prevent...

      $57.33
      $57.33 In Stock
    • Polycarbonate 41412N Mold Release
      $102.91
      Slide 41412N Polycarbonate Heavy Duty Mold Release

      Slide 41412N Polycarbonate Mold Release. Specially developed for Polycarbonate Resins, it will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. Approved by Sabic for use with Lexan* Resin.

      $102.91
      $102.91 In Stock
    • Plastics & Mold Cleaner
      $55.90
      Slide 41515 Plastics Cleaner

      Slide 41515 foaming spray effectively removes oil and dirt marks from all plastics, even sensitive polycarbonates. Plastic Cleaner is ideal for cleaning plastic parts, and helps remove mold release agents prior to secondary operations.

      $55.90
      $55.90 In Stock
    • Slide 41570 image
      $128.26
      Slide 41570 Plastics & Mold Cleaning Wipes

      Slide 41570 Plastics & Mold Cleaner Wipes are convenient towelettes. They effectively remove oil and dirt marks from all plastics, even sensitive polycarbonates, & are ideal for cleaning plastic parts, & removing mold release agents prior to secondary operations. A wipe canister at each workstation helps in maximizing productivity.

      $128.26
      $128.26 In Stock
    • EconoMIST® Mold Release
      $62.60
      Slide 41612N EconoMIST® Light Duty Mold Release

      Slide 41612N Contains the same High-Quality Ingredients as premium Silicone Release except formulated to be used for light duty applications. For hard to release parts use no.40112N Silicone Release. Maximum Operating Temperature: 600°F

      $62.60
      $62.60 In Stock
    • Dura Kote Mold Release
      $83.32
      Slide 41712 Dura Kote Mold Release

      Slide 41712 Dura Kote is a special air-drying mold release agent that will not transfer onto the molded part. It provides a dry, dust-free film on all hard-surfaced molds. It won’t discolor and is paintable when it is baked on.

      $83.32
      $83.32 In Stock
    • Penetrant Plus five
      $63.08
      Slide 41812 Penetrant Plus Lubricant

      Slide 41812 Multi-Purpose Mono-Molecular Penetrating Oil Frees Rust-Frozen Parts. Lifts & replaces moisture with a protective film. It's dielectric non-conductive properties are ideal for lubricating electrical equipment including delicate electronic devices without affecting their intended performance. Penetrant Plus is harmless to most plastics,...

      $63.08
      $63.08 In Stock
    • Slide 47112 NFC Contact and Mold Cleaner
      $218.35
      Slide 42012A Veri-Kleen Contact Cleaner

      Slide has discontinued the Very-Kleen 42012A and now offers an alternative contact cleaner with nearly all of the same product characteristics AND at a cheaper price. The new formula is a non-flamable contact and metal cleaner Part No. 47112 that evaporates very quickly and can be safely used on energized electrical equipment. Click here to request a free...

      $218.35
      Add to cart More
      $218.35 Out of stock
    • One_GaL
      $70.98
      Slide 42112N Silicone Spray Lube

      Slide 4212N Silicone Spray Lube (SSL) has thousands of uses. for paper and film converters. It fights sticking & glue build-up problems. Use it on slitter knives, rollers, slide guides. For food processing. It eliminates sticky food build-up, speeds cleaning. Use it on heat sealers, ovens, guides, chutes, conveyors. For vertical blind manufacturing.

      $70.98
      $70.98 In Stock
    • Slide 42202 Air-O-Spray
      $94.00
      Slide 42202 Air-O-Spray

      Slide 42202 Air-O-Spra sprayer utilizes compressed air at low pressure to atomize a low mist of spray. Included are a 12/Oz spray bottle, 10' of braided hose, and 1/4" pipe thread fitting.

      $94.00
      $94.00 In Stock
    • Slide 42203 Air-O-Spray Extra Bottle & Cap
      $4.50
      Slide 42203 Air-O-Spray Extra Bottle & Cap

      Slide 42203 Extra Spray Bottle & Cap For Use With Slide Air-O-Spray Unit # 42202

      $4.50
      $4.50 In Stock
    • Pump Sprayer and 2 bottles
      $14.50
      Slide 42300 Pump Sprayer and 2 bottles

      Manual Hand Pump Sprayers, Plastic Bottle & Sprayer To Be Used With Slide's Bulk Products. Packaged 2 Units Per Box Priced Per Box

      $14.50
      $14.50 In Stock
    Showing 1 - 25 of 67 items